Zero 4 - Mac - Can't connect to Firewire Soundcard

[Graviton]

The soundcard is not recognized. It was working flawlessly last night.

The last time this happened I removed the AC power, and reconnected. Checked the audio devices, boom there it was again.

My firewire ports are fully functionaly.

I can't connect through the Korg updater.

Please, any suggestions? I would love to try to reset the firmware!?

Macbook pro os X 5.6. zero 4 v1.6.

[justbenjamin]

Same problem here. Now I'm unable to get sound from any of the channels. I hear timecode in the headphone cue. Help!

[justbenjamin]

Same problem here. Now I'm unable to get sound from any of the channels. I hear timecode in the headphone cue. Help!

[justbenjamin]

My Korg Zero4 seems to forget the settings that were previously set in Zero Edit. I simply want to use it as an audio mixer with 2 CDJ's. The first problem is getting a firewire connection to my Mac. It connects randomly. I got it to connect to my mac with all channels passing audio through each channel on the cd/line input. Later on when I restarted the mixer it reverted to no audio passing through any channels with timecode in the headphones. While it was on, I inserted a FireWire cable in one of the ports without any connection to the other end. Then I pulled the cable out and it instantly passed the audio through. I tried the same thing a second time with nothing happening. I have tried holding down the cue on channel one to start up in 44.1 but it did not change anything. I thought doing this would simply start it up in full audio mode. Any suggestions would be appreciated.

[higherbeats]

hi there...
i would ike to buy a zero 4...

does it work now?
have u tested also in snow leo?

[intricate]

Same problem here. Now I'm unable to get sound from any of the channels. I hear timecode in the headphone cue. Help!

Try downloading traktor adapt.exe (traktor setup file all the way down the page):
http://www.korguksupport.co.uk/page.cfm ... 20#Traktor Setup file (Windows and Mac)

This will let you choose if you're using vinyl or cd timecode, and it will let audio pass through without you hearing it.

[justbenjamin]

After booting up the korg zero & mac independently, without any connection between the two, then connecting the FireWire cable, everything works fine. Zero edit recognized the connection and I was able to adjust the settings easily. I still suspect the FireWire port on the Korg zero has a connection/contact issue. The cable seems loose. I will report back if I have any other problems. Thanks for the input!

[b0jan]

Hello, I rly want to get a Korg zero 4, but I cant finde any Korg support on where I can dwnload new firmwire 1.6 update, or the rest of necesary updates, do someone has it in its private colection >?