FLOATING TONE KORG KRONOS X. What is the problem?

Discussion relating to the Korg Kronos Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
kamer
Posts: 27
Joined: Sat Nov 30, 2013 6:02 pm
Location: Israel

FLOATING TONE KORG KRONOS X. What is the problem?

Post by kamer »

Hi.
I own Korg KRONOS X 73 and OS 2.1.2 with FACTORY_V2 .
On the all modes I have a floating tone +12 (one tone higher).
It occurs randomly (or immediately after switching on , or during working...)
If I've moved and back joystick Y+ , the sound returns in normal tone.
And so repeatedly...
The joystick visually in good condition.

Someone has a ready solution to this problem?
Thanks everybody.
User avatar
ak
Approved Merchant
Approved Merchant
Posts: 497
Joined: Sun Mar 06, 2005 6:05 pm

Post by ak »

You will have to take it to an authorized center by Korg and let them check the Pitch-bend Joystick. I think you will need to replace the JS.
http://www.kelfar.net

<a href="https://www.korg.com/Services/kronos_re ... tabsKELFAR" target="_blank">KELFAR SOUND LIBRARIES @ Korg Shop</a>
<a href="http://kelfar.net/KronosSounds.htm" target="_blank">KORG KRONOS SOUND LIBRARIES</a>
<a href="http://kelfar.net/prod08.htm" target="_blank">Korg M3 World Music Set</a>

Image Image Image

Korg M3 and Kronos
User avatar
kamer
Posts: 27
Joined: Sat Nov 30, 2013 6:02 pm
Location: Israel

Post by kamer »

Thank you ak.
I'll do so.
If you know the details, tell me please,
what is the essence of the case?
User avatar
StephenKay
KARMA Developer<br>Approved Merchant
KARMA Developer<br>Approved Merchant
Posts: 2995
Joined: Tue Jun 18, 2002 2:16 am
Location: Scottsdale, AZ
Contact:

Post by StephenKay »

I don't know what is this "floating tone" sound you describe. Can it be recorded? It doesn't sound like a pitch-bend JS issue. Are you talking about the Vector JS? In any case, if you are talking about some sound that is sounding even when you are not playing the Kronos, that's not a pitch bend issue... Does it happen on specific Combis or Programs?
User avatar
kamer
Posts: 27
Joined: Sat Nov 30, 2013 6:02 pm
Location: Israel

Post by kamer »

Hi, Stephen.
This mainly occurs when I use the Set List. In my songs I use several solo tracks. When I switch tracks from panel , the sound of the selected track may increases by about one tone. But in this time the song played and remained in a normal tone.
If I just move the joystick (not vector joystick) in the direction Y+, the solo track sound returns to the tone of the song.
If I repeat a song, this increase may not occurs or occurs later.
If the same song I'm playing in Sequencer mode, this does not happen.

I have myself broke down. While I have no solution.
User avatar
StephenKay
KARMA Developer<br>Approved Merchant
KARMA Developer<br>Approved Merchant
Posts: 2995
Joined: Tue Jun 18, 2002 2:16 am
Location: Scottsdale, AZ
Contact:

Post by StephenKay »

Ah, I think I understand - it's somewhat of a language or terminology issue. I didn't understand your use of "floating tone". But you mean the pitch of the track, when you are playing it, is one semitone (or two) above normal pitch. (Not +12, as you originally said, which would be an octave.)

So, advice from ak is correct. This sounds like a joystick malfunction issue. I'm sorry, but may need service.
User avatar
kamer
Posts: 27
Joined: Sat Nov 30, 2013 6:02 pm
Location: Israel

Post by kamer »

I found the problem. :D
The joystick is not returned to the neutral position.
I hope this will not happen again.
Thanks all.
User avatar
StephenKay
KARMA Developer<br>Approved Merchant
KARMA Developer<br>Approved Merchant
Posts: 2995
Joined: Tue Jun 18, 2002 2:16 am
Location: Scottsdale, AZ
Contact:

Post by StephenKay »

Yes, but considering it has a spring on it, and it is supposed to automatically return to the neutral position, you might need to open it up and fix the spring (or have it fixed) if you have to manually return it to the center position.
Post Reply

Return to “Korg Kronos”