You welcome !
Feel free to PM me if you get stuck ..
I'll be in studio all day tomorrow .
Z>>
EXs16: Installation failed.
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
It's possible that the file has not been unzipped correctly,perhaps too many times by the App that was used...??
A few suggestions.
On a mac,use the built in Archive Utility....basic setting.
This will produce a folder K2 EXs16.
Most of the following has already been mentioned by zardoz,but I suggest a slightly different method at Point X.
Copy it onto an usb stick…
Or
Open it and copy all its contents onto an usb stick.
Then plug it into the Kronos.
Open the folder(or from a the list) and select the EXs16.exsins ….this is the installer.
Point X.
Click the Red Install button at the bottom right screen.
Note- if you have a fail message,go back by pressing the up button…then try again.
Then follow the remaining installation as zardoz said.
I've just done this and it worked.
If you still have problems,we will need to investigate further.
Best Wishes.
A few suggestions.
On a mac,use the built in Archive Utility....basic setting.
This will produce a folder K2 EXs16.
Most of the following has already been mentioned by zardoz,but I suggest a slightly different method at Point X.
Copy it onto an usb stick…
Or
Open it and copy all its contents onto an usb stick.
Then plug it into the Kronos.
Open the folder(or from a the list) and select the EXs16.exsins ….this is the installer.
Point X.
Click the Red Install button at the bottom right screen.
Note- if you have a fail message,go back by pressing the up button…then try again.
Then follow the remaining installation as zardoz said.
I've just done this and it worked.
If you still have problems,we will need to investigate further.
Best Wishes.