Korg NanoKontrol not working with El Capitan

Discussion relating to Korg Controller products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
scmighty
Posts: 1
Joined: Fri Oct 02, 2015 8:16 pm

Korg NanoKontrol not working with El Capitan

Post by scmighty »

I just installed El Capitan on my Mac today and now my Korg Nano Kontrol is not working with Garageband anymore! Help!
dirki
Posts: 3
Joined: Sat Oct 10, 2015 11:00 am

Post by dirki »

Yeah, I have the same issue as you, I have installed os x el capitan and my korg nanokontrol is not working anymore with ableton live. I think it s a midi compatibility issue and we must wait for a new driver from korg for the nanokontrol.
I hope that will be quick . . . :oops:
svatikk
Posts: 1
Joined: Mon Oct 19, 2015 11:40 pm

Korg NanoKontrol not working with El Capitan

Post by svatikk »

hi there!same story,but i find way >>>>

all what you need >> remove korg drivers in this locations >>>>

/Library/Audio/MIDI Drivers/

/System/Library/Extensions/


best regards!
:D
Jethri
Posts: 1
Joined: Tue Oct 20, 2015 2:47 am
Location: Philadelphia, PA

Same problem

Post by Jethri »

I have the same problem, running the El Capitan GM release.

Tried deleting the files from the directories mentioned by @svatikk but there is nothing in my MIDI Drivers folder.

I did delete the advKorgUSBMIDIDriver.plugin from the /System/Library/Extensions/ path and restarted, but no luck.

Also tried re-installing KORG USB-MIDI driver from their site but still no luck.

I know the computer is recognizing the nanoKONTROL, you can see if from USB section of "System Information" app.

Will try a few other ideas but hopefully someone has already figured this out!
dirki
Posts: 3
Joined: Sat Oct 10, 2015 11:00 am

Post by dirki »

I have just tried what svatikk said but nothing has changed . . . Impossible to recognize to nanokontrol by the korg control editor and also impossible to send midi data from the nanokontrol to Ableton Live.
User avatar
Jang
Posts: 8
Joined: Thu Jun 18, 2015 10:29 pm
Location: NY

Post by Jang »

Seems to be working as usual over here with El Cap.
Note; the driver files are still there.
tub.thumper
Posts: 1
Joined: Wed Nov 04, 2015 1:04 pm

Re: Korg NanoKontrol not working with El Capitan

Post by tub.thumper »

svatikk wrote:hi there!same story,but i find way >>>>

all what you need >> remove korg drivers in this locations >>>>

/Library/Audio/MIDI Drivers/

/System/Library/Extensions/


best regards!
:D
Thanks svatikk!

NanoKontrol v1 stopped working after upgrade to OS X El Capitan. Removed KorgUSB driver from /Library/Audio/MIDI Drivers/ and advKorgUSBMIDIDriver.plugin from /System/Library/Extensions/ and rebooted.

Now it works and I can still use Korg Kontrol Editor. Bizarre!
dirki
Posts: 3
Joined: Sat Oct 10, 2015 11:00 am

Post by dirki »

tub.thumper wrote:Thanks svatikk!

NanoKontrol v1 stopped working after upgrade to OS X El Capitan. Removed KorgUSB driver from /Library/Audio/MIDI Drivers/ and advKorgUSBMIDIDriver.plugin from /System/Library/Extensions/ and rebooted.

Now it works and I can still use Korg Kontrol Editor. Bizarre!
Follow these instructions to the letter and your Korg Nanokontrol will work on OS X EL CAPITAN !!! Now it works perfectly with Ableton live 9 and Korg Kontrol Editor :D

Thanks tub.thumper!!!
Post Reply

Return to “Korg Kontrol49, microKontrol, padKontrol, nano and K series controllers”