Kaoss Pro+

[Davisnathan49]

I'm un-able to figure out how to utilize the preset sounds and loops I've recorded on the korg its self into my music program. (FL Studio)
I Figured out how to get it to be used as a midi by attaching massive's of FL's sounds to it and playing them off the korg via "Shift 8 or f10" in the program.
Although I cant seem to figure out how to flip it around to where the sounds from the Korg record or are played into my program.
HELP! I'm willing to call or video chat for convenience if possible!!
PM me if anyone can help!

[thehighesttree]

Welcome to the boards! First off for full disclosure: I only own the KP3, not KOP. I do know that there's a specific MIDI-send mode on the devices to allow more of the controls to be sent, but this comes at the expense of using it as an actual sound module. It sounds like you're using this mode, but you should be using the mode that plays sounds from the pad itself.

But before I go over both our heads, understand that MIDI DOES NOT SEND AN AUDIO SIGNAL! Using it in its normal sound-generator mode, the pad should still send stuff like X-Y position and tempo clock, but the actual sounds themselves need to be sent through the RCA outputs in back of the device. You'll need a cable that converts these 2 RCA jacks into a standard stereo headphone plug for your computer before you can record its sounds. Hope that helps!