Electribe 2S Red

NickZoll · Post by **NickZoll** » Thu Jul 21, 2016 6:27 am

Don'thave 1.19 for e2 too. Guys please share

Steeplemouth · Post by **Steeplemouth** » Thu Jul 21, 2016 7:25 am

Version 1.16 and 2.02 for the sampler are both available here:

http://www.korg.com/us/support/download ... /368/2579/

There is an updated parameter guide available to download too.

Steeplemouth · Post by **Steeplemouth** » Thu Jul 21, 2016 7:55 am

subluxator wrote:This is great news.

Can you set it to infinitely loop between two patterns, effectively making it an 8 bar pattern?

According to the updated parameter guide you can loop chained patterns so I suppose you can effectively have greater than 8 bar patterns but I haven't tested it yet.

thebiglebowski · Post by **thebiglebowski** » Thu Jul 21, 2016 8:25 am

Steeplemouth wrote:
SMK wrote:luckily I saved my copies of 1.16 and 1.19
Good work, I'm glad somebody did. Any chance you could share those please?

People don't panic, previous OS versions are available to download. At the bottom of the page there is a „previous versions” link. It goes back to 1.17

NickZoll · Post by **NickZoll** » Thu Jul 21, 2016 11:56 am

thebiglebowski wrote:
Steeplemouth wrote:
SMK wrote:luckily I saved my copies of 1.16 and 1.19
Good work, I'm glad somebody did. Any chance you could share those please?
People don't panic, previous OS versions are available to download. At the bottom of the page there is a „previous versions” link. It goes back to 1.17

Found it, thanks.

mihata · Post by **mihata** » Thu Jul 21, 2016 12:29 pm

I don't know if anyone noticed but the new, color tribes are completely flat, so no slanted body and the pads look evenly above the surface.

Loudest · Post by **Loudest** » Thu Jul 21, 2016 12:40 pm

mihata wrote:I don't know if anyone noticed but the new, color tribes are completely flat, so no slanted body and the pads look evenly above the surface.

Yes, I noticed that too

Moreover, when I saw the video, I have thought that I could not do this with my e2s
(the guy does a sort of "glissando" on the pads to fill all the steps quickly
that would be impossible with mine

)

musicmagus · Post by **musicmagus** » Thu Jul 21, 2016 1:04 pm

mihata wrote:I don't know if anyone noticed but the new, color tribes are completely flat, so no slanted body and the pads look evenly above the surface.

The first 10 seconds of the video show the sides of the unit and they are the same shape.. Slightly slanted.

Sulfur · Post by **Sulfur** » Thu Jul 21, 2016 1:07 pm

Loudest wrote:
mihata wrote:I don't know if anyone noticed but the new, color tribes are completely flat, so no slanted body and the pads look evenly above the surface.
Yes, I noticed that too
Moreover, when I saw the video, I have thought that I could not do this with my e2s
(the guy does a sort of "glissando" on the pads to fill all the steps quickly
that would be impossible with mine )

I've seen that move from Mistabishi and others too in the past but for me it's difficult too, especially if there's not a solid surface under the electribe. Often I miss some pads (I mean that they don't feel the pression). I've never had a good feeling with the toughness of the electribe pads. They need a lot of strongness and sometimes I'm not even able to keep a very long note without the pad losing pression and interrupting sound. Since my last finished project some time ago my right fourth finger has been hurting and it didn't stop yet.

musicmagus · Post by **musicmagus** » Thu Jul 21, 2016 1:08 pm

Loudest wrote:
mihata wrote:I don't know if anyone noticed but the new, color tribes are completely flat, so no slanted body and the pads look evenly above the surface.
Yes, I noticed that too
Moreover, when I saw the video, I have thought that I could not do this with my e2s
(the guy does a sort of "glissando" on the pads to fill all the steps quickly
that would be impossible with mine )

Have you tried the 'glissando' as you call it? Just press pad 1 and rub your finger across all the pads... Or use two fingers and do both rows at the same time.

Works on my sampler since day 1!

Loudest · Post by **Loudest** » Thu Jul 21, 2016 1:59 pm

musicmagus wrote:Have you tried the 'glissando' as you call it? Just press pad 1 and rub your finger across all the pads... Or use two fingers and do both rows at the same time.
Works on my sampler since day 1!

yes
but same thing as Sulfur.. some pads don't feel the pression...

(must say that the pads are pretty sunk on my unit..
nothing to do with the models on the video where the pads seem well high and all equal)

but ... never mind! I got used
for me, these machines do not have a lot of flaws on the "hardware" side
all my complaints are on the "software" side, so ... please, sign the petition!

CEB · Post by **CEB** » Thu Jul 21, 2016 4:32 pm

I am trying to figure out what the sample length limits are on the new Electribe Sampler. The specifications say 270 seconds regardless of SD card size. It that the limit for each individual sample of of all the user samples combined?

I was hoping it would be fully dynamic memory allocation like the SP404SX but 4 minutes and 30 seconds would be long enough for any of my individual one shots.

Thanks

jbvdb493 · Post by **jbvdb493** » Thu Jul 21, 2016 5:57 pm

So what are the improvements with sample loading in the new OS? I am kinda interested in the sampler now with pattern chaining. Is anyone running the new OS yet?

diallo · Post by **diallo** » Thu Jul 21, 2016 7:23 pm

I just loaded 2.02 and set up chaining. it works lovelyly. I set up one pattern to play 2x and chain to another, hit save then go to the other pattern set that up to play 1x and chain back to the former pattern, hit save... play.. its a perfect update...

I still haven't found how to do the return to saved state but the undo is easy to do.

Thanks Korg people, much appreciated.

sl23 · Post by **sl23** » Thu Jul 21, 2016 7:59 pm

.....