Sustain pedal doesn't work on Sequencer
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Sustain pedal doesn't work on Sequencer
I record,let's say piano on sequencer, and of course play sustain pedal with it, but when I play back the recording, there is no sustain,and it sounds as if I recorded without it. I tried updating the Kronos to the latest version, but the problem is still there. I'm probably missing out on something. My pedal is Korg DS-1H.
I see you've had this problem for almost a year now....?!! http://www.korgforums.com/forum/phpBB2/ ... p?p=758616
Reading the previous topic you made about it and the advice given, your settings, etc., I really can't think of what could be causing that. If the damper works normally it should also record. So I guess the question I have for you is this: Are you able to record other CC data, like the joystick pitch bend/modulation or knobs? Is it only the damper CC#64 not being recorded?
Reading the previous topic you made about it and the advice given, your settings, etc., I really can't think of what could be causing that. If the damper works normally it should also record. So I guess the question I have for you is this: Are you able to record other CC data, like the joystick pitch bend/modulation or knobs? Is it only the damper CC#64 not being recorded?
OK. Just did a test on my M3 and was able to reproduce this. I think I might know what's causing this.
Go to Global P1 MIDI. In the top right corner, is Enable Control Change checked? If not, turn it on. Make sure to save this change permanently by executing the Write Global Setting command from the menu.
Go to Global P1 MIDI. In the top right corner, is Enable Control Change checked? If not, turn it on. Make sure to save this change permanently by executing the Write Global Setting command from the menu.