microKORG S no sound coming through the interface

testthetest · Post by **testthetest** » Mon Nov 08, 2021 6:03 pm

For reference, i have a microKORG S that works fine with it's on-board speaker or headphones plugged in, however i can't get it to produce sound to fl studio or similar, though the midi does work fine.

What i've tried is setting the speakers to off, but still no sound was produced. I'm using a Behringer UMC-22 audio interface, right now i have two 1/4" cables connected from my microKORG L/mono and R into the output L / R, and headphones connecting to the interface, no matter what i try i can't get any sound. Here's what my FL studio looks like, which i believe is the correct settings:

[url]https://i.imgur.com/JxMlU8B.png[url]

OpAmp · Post by **OpAmp** » Mon Nov 08, 2021 8:55 pm

Hi,

Which interface are you talking about?
One thing is for sure, the USB interface will only carry MIDI data and NO audio. If you want to record the audio, hook up the audio outputs to your audio interface.

Have fun.

testthetest · Post by **testthetest** » Mon Nov 08, 2021 9:55 pm

OpAmp wrote:Hi,

Which interface are you talking about?
One thing is for sure, the USB interface will only carry MIDI data and NO audio. If you want to record the audio, hook up the audio outputs to your audio interface.

Have fun.

I'm talking about the Behringer UMC-22, i've done a lot of troubleshooting so far, i have 2 1/4" cables connected from my microkorg S to my behringer, but i think it's a driver problem with the UMC-22, since my computer can't find any, and the ones i download on the internet doesn't register sound