Midi message for Sequencer start / stop

[jeffkluth]

Im trying to see if I can use my iRIG Blueboard to start and stop the sequencer. I think its possible if I know the midi messages for that function. Has anyone tried this ? THANKS

[voip]

Try sending CC#45 to the Nautilus.

.

[jeffkluth]

thanks my app wants a controller number and a value - do you know what I should put there ?

[voip]

Try using values below 63 for off, and up to 127 for on. If that doesn't work, as an alternative, try sending SysEx messages: FA to start, FC to stop, and FB to continue.

.

[jeffkluth]

So I was able to come up with the SYSEX message to change modes between Combi and Sequencer mode but so far no luck on Sequencer Start. The syses I captured when I started it manually was

F0 42 32 00 01 5D 6D 0A 00 00 05 00 00 00 00 F7

but when I send it nothing is happening.

The sysex that changes to sequencer mode that works is

F0 42 32 00 01 5D 4E 04 F7

[voip]

Sorry, I should have said System Realtime Messages: FA is sequencer start, FB is Continue, and FC is stop, at lease according to the MIDI Implementation document.

https://www.korg.com/us/support/downloa ... /873/4923/

.

[jeffkluth]

Found it. You have to set the Midi Set up/Midi clock to either to External Midi or Auto Midi and then it will recognize the Start Sequencer command

[voip]

Excellent. Glad it works :-)

.