Replacing LCD on PA2X Pro

Discussions relating to the Korg Pa2X Pro, Pa800 & Pa500

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Red Apple
Posts: 2
Joined: Tue Jun 18, 2013 1:36 am
Location: Sydney

Post by Red Apple »

YO8RZE wrote:Hi guys,
,,LCD0001003 LCD 320X240 STN NANYA " - what exactly is the serial number of the LCD display? LCBHBTB61M2 ?
It should be this : LCD0001004 ( according to korg parts seller )
you can find the details or order here as well :
http://www.guitar-parts.com/catalog/kor ... -lcd-pa800
Hassan
YO8RZE
Posts: 21
Joined: Thu Dec 16, 2010 6:31 am

Post by YO8RZE »

LCBHBTB61M63S is the exactly model of the LCD display for the PA800.
NANYA Plastic Corporation.
medivian
Posts: 3
Joined: Sat Jul 21, 2012 8:57 pm

Post by medivian »

Rob Sherratt wrote:Hi dmkeys,

If you let me know exactly which parts of the display are broken, and post some pictures I can be more specific which parts are needed.

Is the motor drive working?
Is the display showing anything?
Is the glass broken?
etc

I assume you dropped something on the LCD panel breaking it. If so these may be the parts you need, just depends what is broken:

DISPLAY LCD0001004 comprising:

LCD0001003 LCD 320X240 STN NANYA
TCP0010000 TOUCH PANEL PANASONIC EMU601A2MA32
FEL0010042 BIADESIVO FUST LCD 3M ART. 468MP
PLA0010081 ROUGH DISPLAY COVER LCD 1
PLA0010082 ROUGH DUSPLAY SUPPORT LCD 1

If there is damage to the circuitry you will need a new circuit board:

GRA0002140 LCD INTERFACE Circuit Board

If there is damage to the motorized tilt mechanism there are other parts needed for that.

Best regards,
Rob
Hi,
I have to replace my PA2x touch screen, it works well but it has two yellow spots... I know there are different parts to replace and I would like to know which part I would need.

Regards
Image
User avatar
AntonySharmman
Approved Merchant
Approved Merchant
Posts: 3733
Joined: Sat Oct 16, 2010 2:24 pm
Location: Hellas
Contact:

Post by AntonySharmman »

Your LCD is damaged , but even if you could find only LCD part , you must be a very skilled technician to replace it
since carbon strips that LCD surfaces are fed , can easily moved and destroy the brand new LCD too , not to mention
other dedicated tape strip connections !
Korg service just replace the whole moving screen box , even in case of burned florescence lamp (that has a 5000 working hours lifetime).
In your case that box costs 150 euros (200 USD) plus service fees , just contact with your dealer and ask if this screen
box is still available in their service stock or to order it.
Music Conductor - Sound Engineer & Developer - Automotive SMPS/RF R&D - Electronics Engineer
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

Image
wavesΑrt official webpage - KorgPa.gr

DEMO's Playlist - WavesArt Facebook
Post Reply

Return to “Korg Pa2XPro - Pa800 - Pa500”