Hello Atillio,
Tell me how you start with the installation of the usb stick
you have to now first you install everything from the usb stick after this you go
to the website of http://www.xprodata.de/ then you take the update
there is also many new drum's and verry good piano sound also the sound of the panflute is verry nice and a verry good guitar sound
if you like i give my configuration for have more power on your Korg PA2XPRO
before i sell my PA2XPRO i make many picture 's of the equalizing and the micro
so if you like you can have a copy of this
greetz
Dirk
XMS-64 usb stick
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Hello Dirk and Ron,
thanks a lot for your answer.
Before of buying XMS 64, I saw in this forum good (very good) satisfaction from many users and no problem at all on that. So I decided to buy it, believing the operation would be easy, without problem and full of fun, even if expensive !
My PA2X Pro is new and I follow EXACTLY the PA2X XMS-System Installation Guide included in the package.
The only result was to have a tons of Sounds but no adjustements either on Factory Styles or in the Factory Sounds.
No new Styles, or, better, I saw in the stick a folder XMS Bonus Daten where there are also Styles.
But reading your post it seemed to me that new styles should be loaded automatically during the installation
Very sadly, I formatted the KBD with PA2X_ Format.pkg and PA2X_os_res_v201.pkg. Then I reinstalled the XMS System again but no difference.
By myself I discovered the solution on " The BALANCE slider works reverse and no more visible the magnified version of the virtual slider in the display when you move it " because XMS System modifies the setting of this parameter.
They (musitronics) say that X before SoundName signs the adjusted one, but I do not have any Sound with X
I suppose that the USB Stick has some problem but it seems very strange because I did not have any Warning message for mistaken during the installation.
May be that some locking switch has to be unlocked?
But, again, in the Installation guide no mention about nothing.
It seems to me a nightmare, and I don't know how to go out.
Every suggestion will be higly appreciated.
Thanks
Attilio
thanks a lot for your answer.
Before of buying XMS 64, I saw in this forum good (very good) satisfaction from many users and no problem at all on that. So I decided to buy it, believing the operation would be easy, without problem and full of fun, even if expensive !
My PA2X Pro is new and I follow EXACTLY the PA2X XMS-System Installation Guide included in the package.
The only result was to have a tons of Sounds but no adjustements either on Factory Styles or in the Factory Sounds.
No new Styles, or, better, I saw in the stick a folder XMS Bonus Daten where there are also Styles.
But reading your post it seemed to me that new styles should be loaded automatically during the installation
Very sadly, I formatted the KBD with PA2X_ Format.pkg and PA2X_os_res_v201.pkg. Then I reinstalled the XMS System again but no difference.
By myself I discovered the solution on " The BALANCE slider works reverse and no more visible the magnified version of the virtual slider in the display when you move it " because XMS System modifies the setting of this parameter.
They (musitronics) say that X before SoundName signs the adjusted one, but I do not have any Sound with X
I suppose that the USB Stick has some problem but it seems very strange because I did not have any Warning message for mistaken during the installation.
May be that some locking switch has to be unlocked?
But, again, in the Installation guide no mention about nothing.
It seems to me a nightmare, and I don't know how to go out.
Every suggestion will be higly appreciated.
Thanks
Attilio