Korg Forums

Posted: **Sun Mar 10, 2013 10:32 pm**

How about an option to delete a whole page of styles in Favorites instead of having to do it one at a time?

Posted: **Mon Mar 11, 2013 1:36 am**

Also, why doesn't the Pa600 tell us what chord progression is being played for 'INTRO' and 'ENDING' 1 ???

Posted: **Mon Mar 11, 2013 6:51 am**

Tony. if you hold the shift button down while selecting styles, you can multi delete (and copy and paste).

Posted: **Sat Mar 16, 2013 4:54 pm**

i wish on next OS fill in can be selected by assignable switch

Posted: **Wed Mar 20, 2013 4:54 pm**

Way to truely LOCK STS And Pads added to assignable switches !

Posted: **Fri Mar 22, 2013 5:10 am**

dehmani wrote:Hi,
PA600 can load only eight first performance bank from any SET and each bank must be loaded in the same number of original bank.
You can't load ex:bank10 from any SET. You can load only a single performance. KORG must find a solution (new firmware).
THANK YOU

Can you "rename" bank10 to bank07 for example and load it? or does the files have internal settings that will cause problems?

Posted: **Sat Apr 13, 2013 3:03 pm**

Thank you atef81, I try to rename the bank but no change.

KORG PA600QT can't load performance BANK09 to BANK20 from other SET like pa800 or pa2x.
PLEASE KORG correct this problem in the new OS.
THANK YOU.

Posted: **Tue Apr 16, 2013 3:28 am**

Today I had the info that Korg plans to release a new firmware on May

Posted: **Wed Apr 17, 2013 12:25 am**

Where did you get that information from?

Posted: **Wed Apr 17, 2013 12:33 am**

KJandKT wrote:Where did you get that information from?

I'd be interested to know too. I searched in korg.com and korgpa.com and could not find any news !

Posted: **Wed Apr 17, 2013 1:18 am**

Korg Mexico told me this because of an issue I sent to them, on Korg Japan there is the info (only for distributors) that the new firmware should be released the first half of May.

It takes too long because seems that Korg released the PA600 and waited if it will have success, because of it, they are doing the new firmware and for the other side, seems it has tons of bugs.

Is good to know if Korg release a new equipment, be on hold till they understand it has success, otherwise you will never get an update... BAD FOR KORG.

Personally, I like the PA600 but not the Korg brand and I hope it will be my first and last equipment from Korg.

Posted: **Wed Apr 17, 2013 1:25 am**

did you guys see my post about the low-level hum in the headphone output? I wonder if any of you have this issue...as I wrote in the other post quality control...rushing to get the product out, etc. I don't know if it could be fixed in a firmware update or if it is the headphone amp. Please check to see if you have the problem so I can confirm it. I have heard it on two Pa-600's now.

Thanks and God bless

Posted: **Wed Apr 17, 2013 2:05 am**

KJandKT wrote:did you guys see my post about the low-level hum in the headphone output? I wonder if any of you have this issue...

If by hum you mean some kind of white noise, maybe I'm lucky but I don't have it. My headphones are Tascam TH-02.

Posted: **Wed Apr 17, 2013 12:11 pm**

no not white level noise. A faint hiss could be normal with the volume turned way up. This is like unbalanced cable hum (soft) and it is constant. It doesn't increase or decrease in volume regardless of whether or not you increase or decrease the volume of the attenuator on the Pa-600. Could a hum like this occur from a mismatched impedence from the headphones? The ones that I really notice it on (because they are so detailed and closedback) are the Sony 7520's.

Thanks and God bless

Posted: **Sun Apr 21, 2013 10:34 pm**

Hi guys , my pa600 also gets stuck in sound mode when editing styles, i do the next thing: i press the little arow in upper right corner of a touchscreen and then i press exit button twice. I hope that help

Korg Forums

[ KORG PA-600 ] Needed improvements in the new version. (OS)

Bad for Korg