Assignable Switch and Q-Tone [SOLVED]

BR · Post by BR » Fri Aug 08, 2014 7:06 am

Hi AB,
It worked, great. I did exactly as you said.
I don't know how to thank you and you appeared here like an angel.
God bless you my friend.

Bruno 123 · Post by **Bruno 123** » Fri Aug 14, 2015 2:04 am

I have tried everything I can think with no success – When turned back on it reverts back. The lock on the assign switch does work by not letting any other source change it. No luck when I turn it on again.
J
ohn C.
(Pa900)

BR · Post by BR » Fri Aug 14, 2015 9:11 am

Hi Bruno, I tried this suggestion and It worked for me, just give it a try.

...first unlock the Assignable switches then from MENU go and assign the 2 switches to whatever you want then lock them and push on MY SETTING button for few seconds until it asks you if you want to write startup setting press Ok and it will memorize it next time you turn on the PA900.

Bruno 123 · Post by **Bruno 123** » Sun Aug 16, 2015 6:48 am

Asafar thank you, it is working just as you said it would.

The Pa800 does not have a “My Setting” button, all my start up settings was store in Performance 1. The My Setting button is new; it was not a part of my thinking.

The most difficult problems are so easily understood after the fact.

Thank you again, John C.