Korg Forums

hello
thx for this good website
my problem is , my korg pa1x pro not running
its only on and showing data loading .. not open never
pls hepe me
thank you[/b][/i]

I would try a full reload of OS and resources.

Pete

karmathanever wrote:I would try a full reload of OS and resources.

Pete

i download the OS on floppy disks and trying but same problem

karmathanever wrote:I would try a full reload of OS and resources.

Pete

\
how pleace ?

Check out this thread and the documentation included in the downloads.
http://www.korgforums.com/forum/phpBB2/ ... hp?t=56547
The download links in the thread have changed so if you don't already have the files, please let me know and I may be able to help.

Do you have a PA1X or PA1XPro (i.e. 61 note or 76 note)?

Cheers

Pete

karmathanever wrote:Check out this thread and the documentation included in the downloads.
http://www.korgforums.com/forum/phpBB2/ ... hp?t=56547
The download links in the thread have changed so if you don't already have the files, please let me know and I may be able to help.

Do you have a PA1X or PA1XPro (i.e. 61 note or 76 note)?

Cheers

Pete

i have pax1 pro
but my problem ,, when i turn on the keyboard ,, the display showing . loading pcm data . and still like this not change
so how can load the OP disks ?

im sorry but no one here can help me only you dear ,,
thank you .. Mody

karmathanever wrote:Check out this thread and the documentation included in the downloads.
http://www.korgforums.com/forum/phpBB2/ ... hp?t=56547
The download links in the thread have changed so if you don't already have the files, please let me know and I may be able to help.

Do you have a PA1X or PA1XPro (i.e. 61 note or 76 note)?

Cheers

Pete

i have pax1 pro
but my problem ,, when i turn on the keyboard ,, the display showing . loading pcm data . and still like this not change
so how can load the OP disks ?

im sorry but no one here can help me only you dear ,,
thank you .. Mody

mody wrote:

karmathanever wrote:Check out this thread and the documentation included in the downloads.
http://www.korgforums.com/forum/phpBB2/ ... hp?t=56547
The download links in the thread have changed so if you don't already have the files, please let me know and I may be able to help.

Do you have a PA1X or PA1XPro (i.e. 61 note or 76 note)?

Cheers

Pete

i have pax1 pro
but my problem ,, when i turn on the keyboard ,, the display showing . loading pcm data . and still like this not change
so how can load the OP disks ?

im sorry but no one here can help me only you dear ,,
thank you .. Mody

hope u help pleace .. till now cant make it

Hi Mody

It is critical that you create the diskettes correctly:-

In order to create the 4 diskettes, you should have 5 files like this:-
Pa1X_os_v301_Dsk1.exe
Pa1X_os_v301_Dsk2.exe
Pa1X_os_v301_Dsk3.exe
Pa1X_os_v301_Dsk4.exe
Pa1X_Upgrade_Procedures.pdf (instructions)

I strongly recommend that you read the "Pa1X_Upgrade_Procedures.pdf" upgrade
instructions in conjunction with the steps below...

Prepare 4 blank diskettes
Insert first diskette and double click Pa1X_os_v301_Dsk1.exe
...this will build diskette 1
Remove the diskette when finished and label it "OS3.01 Disk #1"
Insert second diskette and double click Pa1X_os_v301_Dsk2.exe
...this will build diskette 2
Remove the diskette when finished and label it "OS3.01 Disk #2"
Insert third diskette and double click Pa1X_os_v301_Dsk3.exe
...this will build diskette 3
Remove the diskette when finished and label it "OS3.01 Disk #3"
Insert fourth diskette and double click Pa1X_os_v301_Dsk4.exe
...this will build diskette 4
Remove the diskette when finished and label it "OS3.01 Disk #4"

If you want to check the contents of the diskettes they should be like this:-
• On diskette 1:
• FDBOOT.SYS
• PA1X_1.BIN
• On diskette 2:
• PA1X_2.BIN
• On diskette 3:
• PA1X_3.BIN
• On diskette 4:
• PA1X_4.BIN
•
• and so on

These four diskettes will be used to build your OS 3.01


Make sure the PA1XPro is powered OFF
Insert OS3.01 Disk #1
Power on PA1XPro
Follow the prompts on the screen
(Note: for diskette #1 press the "Intro 1" button
INSTEAD of pressing the "OK" on the screen if you wish to clear your PA1XPro before building the new OS)
The remaining 3 diskettes will be prompted for and all you do is simply insert them when requested.
When finished loading all diskettes, power OFF the PA1XPro.

Remove diskettes and Power ON the PA1XPro
The keyboard should start up but you will see a "no style" and no sounds - this is OK.
MAKE SURE YOU RE-CALIBRATE THE TOUCH SCREEN NOW (seems to always be necessary when installing OS3.01)
Now you must load the OS Resources file into the PA1XPro

Let me know how you go

Pete