Broken _ Korg screen issues

Discussion relating to the Korg Krome Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
shaunleesamson
Posts: 1
Joined: Wed Jan 06, 2016 11:36 am
Location: Bahrain

Broken _ Korg screen issues

Post by shaunleesamson »

Hey guys,

just had a misfortune - my korg screen cracked - and now i have limit ways to getting around the interface.

2 off the issues which i need help in -

1. how can i transpose without using the screen
2. How can i add more tones via memory card without the screen/

please help if u guys have any suggestions.
wta
Posts: 5
Joined: Mon Dec 07, 2015 6:16 pm

Post by wta »

I ordered one on the net to replace mine which turned black, you can find cheap ones, provided that it has a 50-pin connector and a 15-cm flat ribbon close to the center. You need a 7-inch display with a resolution of 800x480. Mine cost $15, but you can find one at any price. At $15 it's not of very good quality (colors are not as good as the original one) but it's better than nothing. Note that I didn't have to change the touch panel, you'll have to replace it. It's a resistive one with the 4 wires.

Here's the procedure to access it to replace it. You may want to fix the bug on the board which causes it to turn black after some aging :

http://www.korgforums.com/forum/phpBB2/ ... hp?t=82872
Post Reply

Return to “Korg Krome”