Page 1 of 1
TOUCH SCREEN ISSUE HELP!
Posted: Mon Mar 21, 2016 12:33 pm
by eltmatt
I've just got a second hand Krome off ebay and everythings working fine except the top right of the screen where the drop down menu is, isn't coming up when I press on the screen.
Is there a way to fix this? Or another way to access that menu?
Posted: Mon Mar 21, 2016 1:57 pm
by voip
Sounds like the screen needs recalibrating. Touch Panel Calibration can be found in the Global menus. Once done, it should be possible to access the drop-down. Callibration is on page 217 of the Krome Parameter Guide. There is also a hint to get to getting to the relevant menu from the Global P0 menu, i.e. holding down the ENTER key and pressing the 3 button.
.
Posted: Tue Mar 22, 2016 5:37 pm
by eltmatt
Great, this fixed it. thanks
Posted: Wed Mar 23, 2016 9:46 pm
by gnbutt
I have that exact problem with my M3, top right pull down menu is almost impossible to activate. Will give your recommendation on the Krome a try and see if this works for the M3 too. Thanks !
Posted: Fri Nov 11, 2016 12:11 pm
by Topaz-uk
thanks very much for this
(books day off to RTM)
voip wrote:Sounds like the screen needs recalibrating. Touch Panel Calibration can be found in the Global menus. Once done, it should be possible to access the drop-down. Callibration is on page 217 of the Krome Parameter Guide. There is also a hint to get to getting to the relevant menu from the Global P0 menu, i.e. holding down the ENTER key and pressing the 3 button.
.