Korg Forums

Hi, Just got a E2. I like it. Just cant figure out the lenght of lfo.
What correspond speed 127? 4Bar?,8Bar? destination with BPM means the lfo is sync, but what the setting for 1 cycle/bar for example?
When the lfo is retriggering and when not?
Cant find any thread on this, any help would be great, thanks.

The info is not out there. I've learned to enjoy using my ears.

immon wrote:The info is not out there. I've learned to enjoy using my ears.

Thanks for replying but not very helpful...

I guess I go by ear too when I must. I haven't made an exact note of it yet.
I will dial in some even number parameters though...60 for 1/4. 80 for 1/8. 100 for 1/16.
Some rates can be found before those given numbers though...1/4 actually starts at 56 I think.
Thirds or whatnot found in between?

Queue up an initialized pattern with that kick drum playing...
sustain a single note...
dial up the LFO TriB Level modulation with the depth on full...
and give it a test. Tweaking the speed dial.

Really?!Nobody knows?Nobody wants to share?

We cant just go telling all the info to anyone who logs on now can we?

here you go Pach. worked out just for you.!
i think it's 100%?
SawupB level. obviously different lfo shapes sound different but the numbers should still be the same. enjoy your tribe )

0=4bar, 8=2bar, 16=1bar, 24=1/2., 32=1/2, 40=1/4., 48=1/2t,


56=1/4, 64=1/4., 72=1/4t, 80=1/8, 88=1/8t,


96=1/16, 104=1/16t, 112=1/32, 120=1/48,



"We cant just go telling all the info to anyone who logs on now can we?"

Thanks mr canister. One day the universe will pay you back for your altruism.
40 and 64 = both 1/4?
I'll find out that...yes I know. "We cant just go telling all the info to anyone......"

the reason i was snooty is cause in my experience it varies with the lfo detune/ifx/cut off /eg/modulation values and settings. wich means is quite a ever morphing thing in my experience.

hi, pach. cheers, i could do with some karma points.
ah. you're right! new i'd make a mistake...
i'm not back home til sunday but i'd say 40 should be dotted 1/2. timing.
what i didn't realise was if you start from zero and slowly turn the lfo speed up, you can hear the it will only increase in speed at those values. increments of 8. i think the first triangle lfo is free and not clocked.

only pulling your chain krapapow ) yeah, you can do quite a lot with the modulation, even tho it is has only one destination. but i think knowing the values is pretty handy for dotted and triplet timings, which can sound a bit weird in the mix.

enjoy