Korg Forums

--I've looked everywhere I know to trying to find the factory restore or preload data to return my PA 50 back to factory. Any ideas where I might find these? I looked on the Korg page and it only show for the PA50 SD.

Also my screen isn't that bright and I now understand there is no contrast control, I've bought a new backlight from Parts Is Parts but am not sure if replacing it is something I can do. I've never soldered anything in my life but from the picture it looks like the backlight just plugs in?

Any help would be appreciated, thanks..
Scott

I only have the pa50SD but I'm fairly sure you will need at least 10 floppy disks, 5 to backup what you have Now. If you don't do that *First* you may end up with a dead keyboard.

The other 5 disks are needed to load the system back to factory.

Meantime some helpful advice about your keyboard problem here;
http://www.justanswer.com/electronic-mu ... after.html

The Korg link on that page is out of date but I'm guessing the pa50SD files may work, Others here might know more,,,,Or you could just Email Korg.
Phil.

phatt wrote:I only have the pa50SD but I'm fairly sure you will need at least 10 floppy disks, 5 to backup what you have Now. If you don't do that *First* you may end up with a dead keyboard.

The other 5 disks are needed to load the system back to factory.

Meantime some helpful advice about your keyboard problem here;
http://www.justanswer.com/electronic-mu ... after.html

The Korg link on that page is out of date but I'm guessing the pa50SD files may work, Others here might know more,,,,Or you could just Email Korg.
Phil.

Thank you for your advice I appreciate it..

Thank you for your advice...