Page 1 of 1
Korg PA4X assigning drums or bass example to diff outputs
Posted: Wed Jun 14, 2017 6:35 am
by Nicks Korg
Hi, I just recently purchased the new PA4X and first timer with an arranger. Does anyone know how to assign the drums, bass and all upper sounds separately through the outputs (Left, Right & 1 & 2) so I can control a separate mix to a mixing desk. Any suggestions will be much appreciated.
Nick
Posted: Sat Jun 17, 2017 12:37 pm
by jpires
Hi Nick
Very easy to do, press Global then Audio/Video and you will see all the left and right
outputs, for style mode you have to select style on the bottom of the screen, for sequencer you have to select player 1or player 2, remember before you do all the above you mustt be on the track/instrument
You want to assign to the outputs
I hope I explained the you you understand.
JP
Posted: Sun Jun 18, 2017 3:51 pm
by jpires
Hi Nick
Korg PA4X assigning drums or bass example to diff outputs
Posted: Mon Jun 19, 2017 6:34 am
by Nicks Korg
Fantastic JP. Thanks for your response as I tested it and all works. Thanks again.
Posted: Mon Jun 19, 2017 12:04 pm
by jpires
I am glad I was able to help.
JP
Posted: Tue Jun 20, 2017 9:10 am
by Bruno 123
I use the three dedicated control buttons in the manner.
1-Cut Acc. 1 to 5
2-Cut bass
3-Cut drums
Using this setup plus using the pads can they all the boredom from the styles.
John C.
Posted: Fri Jun 23, 2017 10:25 pm
by mintjamman
Keep in mind that sounds routed to Aux 1&2 outputs lose effects