Korg Forums

Posted: **Tue Aug 15, 2017 5:37 pm**

where i can buy korg pa800 joystick Harness ??

i searched by Google but there are no sellers
just one seller from turkey but he does not respond to my messages

and the korg pa800 joystick Harness is not available in other sites [/img]

Posted: **Tue Aug 15, 2017 6:10 pm**

These guys list it under Pa1xPro - same as 2x. Not in stock evidently, but it doesn't say it's discontinued. Good luck.
https://www.guitar-parts.com/catalog/ko ... -pa800-etc

Posted: **Tue Aug 15, 2017 6:30 pm**

Giner wrote:These guys list it under Pa1xPro - same as 2x. Not in stock evidently, but it doesn't say it's discontinued. Good luck.
https://www.guitar-parts.com/catalog/ko ... -pa800-etc

thank you so much Giner
Unfortunately it's not available for a long time i found this page since 3 months ago and i put my email but bothing happend still not available !

sorry for my english

Posted: **Wed Aug 16, 2017 2:27 am**

Yeah, I had wondered about that "don't call me, I'll call you" sort of response.

How about these guys? Did you try them already?
http://syntaur.com/korg.html

I ordered a small pot from these guys for my Pa3X and they had the part in stock and had it mailed to me within a week. Hope they can help you out.

Posted: **Thu Aug 17, 2017 7:10 pm**

Giner wrote:Yeah, I had wondered about that "don't call me, I'll call you" sort of response.

How about these guys? Did you try them already?
http://syntaur.com/korg.html

I ordered a small pot from these guys for my Pa3X and they had the part in stock and had it mailed to me within a week. Hope they can help you out.

Thank you again Giner

there alot korg parts for pa series but unfortunately I did "nt find joystick Harness for pa800/pa600/pa1x/pa2x

Posted: **Tue Aug 22, 2017 3:05 pm**

really there's no korg pa800 parts ??????

Posted: **Sun Sep 10, 2017 8:21 pm**

please

Posted: **Mon Sep 11, 2017 2:04 am**

I'm not sure, but looks like Korg pa800 joystick Harness has one 6 wires female connector split on two 3 wires female connectors.
If you can't buy anywhere you need to make it.
The easy way is buy something like this (link below) using single connectors, they will work.
http://www.ebay.com/itm/40pc-Dupont-Wir ... 1450447984
Is 40 single, you need only 6, can save rest for something else.
You can try buy connectors and wires, but is kinda tricky to do yourself
Best way is go to any electronic repair store and they make for you.

Good Luck.

Posted: **Mon Sep 11, 2017 2:30 am**

Nemik wrote:I'm not sure, but looks like Korg pa800 joystick Harness has one 6 wires female connector split on two 3 wires female connectors.
If you can't buy anywhere you need to make it.
The easy way is buy something like this (link below) using single connectors, they will work.
http://www.ebay.com/itm/40pc-Dupont-Wir ... 1450447984
Is 40 single, you need only 6, can save rest for something else.
You can try buy connectors and wires, but is kinda tricky to do yourself
Best way is go to any electronic repair store and they make for you.

Good Luck.

Thank you sooooo much Nemik that's what i'm looking for

is there like this one but female to female ? because korg pa800 joystick Harness have female to female Jumper

and
are you sure korg pa800 joystick Harness has " 2.54mm" jumper size ?

thank you so much that will be helpful for me and all my friends

Posted: **Mon Sep 11, 2017 9:16 am**

ANAFREE wrote:
is there like this one but female to female ? because korg pa800 joystick Harness have female to female Jumper

and
are you sure korg pa800 joystick Harness has " 2.54mm" jumper size ?

thank you so much that will be helpful for me and all my friends

yes, you can get female to female.
http://www.ebay.com/itm/40pc-Dupont-Wir ... 1483117724

Korg Pa600 has 2.00mm JST PHD type connectors (not sure size Pa800),

means is not 2.54, but this is jumper cable should be OK.
I got feeling if you buy harness for Pa600 most likely will works on Pa800, same connectors and same cables.

P.S. If you dealing with discontinue products is always that way, you need use your imagination to make work.

Posted: **Mon Sep 11, 2017 2:56 pm**

lol
Thank you brother

I've just bought it

I'll start now

you are a mazing Nemik thank you thank you thank you... for ever

Posted: **Mon Sep 11, 2017 3:38 pm**

i just finished installing the new wires, and guess what; it worked perfectly from the first try.
this is amazing just as you are... thanks soooo much, appreciated buddy.

Posted: **Mon Sep 11, 2017 5:39 pm**

ANAFREE wrote:i just finished installing the new wires, and guess what; it worked perfectly from the first try.
this is amazing just as you are... thanks soooo much, appreciated buddy.

I'm glad was helpful.

Remember: If you dealing with old equipment, google, YouTube and your imagination is your best friend .

Posted: **Mon Sep 11, 2017 6:48 pm**

Nemik wrote:
ANAFREE wrote:i just finished installing the new wires, and guess what; it worked perfectly from the first try.
this is amazing just as you are... thanks soooo much, appreciated buddy.
I'm glad was helpful.

Remember: If you dealing with old equipment, google, YouTube and your imagination is your best friend .

You're true
I did not know the name of the jumper - cable & i have watched youtube videos for my issue but nothing useful