Custom Voices & Pa4X

Nev · Post by **Nev** » Thu Aug 24, 2017 6:16 pm

Hi Folks, As a newcomer to Korg and this great forum, my tired old eyes have tried looking through the older posts for an answer but I have had to give up and ask the question....

I have several much loved UVN voices used on Yamaha Tyros. Will the Pa4X take these on board? Has it got flash memory? If so how do I install them please.

Fingers crossed....

pawlikp100 · Post by **pawlikp100** » Thu Aug 24, 2017 6:25 pm

Korg is not compatible with Tyros's voices.

Nev · Post by **Nev** » Thu Aug 24, 2017 7:35 pm

Thanks for replying but I knew the basis of your answer. My question is about UVN third party voices which have wav elements.

AntonySharmman · Post by **AntonySharmman** » Thu Aug 24, 2017 9:00 pm

Files must be extracted from flash memory , then converted to PCM format and then you have to create
SOUND from scratch in Pa4X !
If you can send these files extracted to us , then we can do the rest job for you in Hire a Sound Developer
Service : http://wavesart.eu/Hire

Nev · Post by **Nev** » Thu Aug 24, 2017 9:55 pm

Hi Anthony, Thanks for that information. I don`t think I will go to all that trouble. The voices are mostly very good choirs plus one or two instruments but there are good substitutes on the Korg. I accept from your reply that the easy answer is.... No it cannot be done in house simply. I appreciate your time and posting.

kbrkr · Post by **kbrkr** » Thu Aug 24, 2017 10:32 pm

Nev,

Chicken Systems Translator 6 should be able to convert these to a KORG format. I think UVM is one of the supported formats which should convert the sounds to .KMP files which the Korg should be able to convert to a multi-sample.

Let me check to see if I have any UVM files I can convert to test this.

Al

kbrkr · Post by **kbrkr** » Thu Aug 24, 2017 10:51 pm

HI Nev

I was able to convert a .UVN file to a .WAV, then convert it to a Korg Kronos file with .KMP wave files. So it can be done.

If you would like me to convert your file, send it to me via private messenger.

Al

duby2 · Post by **duby2** » Fri Aug 25, 2017 12:16 am

Nev
It would be nice is you could post the new sound or wave for the rest of us ,, that if kbrkr ,, can do it .

Nev · Post by **Nev** » Fri Aug 25, 2017 10:06 am

Hi Al, That sounds as though it might work. Thank you. PM on its way with link. Your help is much appreciated.

Duby, You never know your luck. Watch this space....

bud2 · Post by **bud2** » Sat Aug 26, 2017 2:47 pm

There you go Neville, I told you that this forum is a superb one ready to help fellow players of all abilities, I am so glad they were able to help you. 10/10 for these wonderful Korg guys.

Bill