Korg Forums

I install samples on my K x. when i playback samples the pitch changes with pressure. Like after touch is controlling pitch. ????

Are you playing the samples in Sample mode or through the HD-1 engine program?
Sample mode should not alter pitch via velocity or aftertouch.
HD-1 mode would do that.

so how do I change that?

In HD-1 program you can look at OSC pitch page.
I am not sure how it works but it does focus on things you can do to pitch behaviour.
I think there are AMS options there for pitch modulation.
In your case, i would look for pitch modulation AMS that was set to Velocity or Aftertouch.

Sometimes it can be more complicated where pitch modulation AMS is set to something else.
Something like LFO, and then in the LFO page there would be another AMS over the LFO to have Velocity or Aftertouch modulate that LFO.

Also remember there are tab pages for OSC pitch 1 and for OSC pitch 2.
So you may have to look in both pages if the program uses both OSC to make its sound.

Have a look, and i apologize in advance if this does not help you.

OK that did it, I think. Thanks