Korg Forums

OK I know some of you will think it weird but I like having the PAas Speaker attached even when I'm performing out. Reason being it provides a nice monitor and sounds nice with the pianos. I also use a pair of great QSC K10.2 Speakers. I only wish Korg could have developed the PAas speakers with a connector lead as well. Why! you are thinking?

Here's why. I want to use a Two Tier Keyboard stand so I can use the Yamaha MOXF6 above. Most conventional Keyboard stands do not provide enough depth to take the PA4X with the speaker attached. Depth would need to be 21" So I'm throwing it into the Korg Arena to see if any of you wizz kids can come up with a good solution to this.

Here's hoping

Checkout a Hercules Z stand or On Stage Z

Thanks for your reply

Lower tier depth: 410mm (16.15”) I need 21" Depth

The PaAS speaker is self supported by the Pa4X (and is in fact higher than the base of the Pa4X so you can access the rear ports). It doesn’t need support from a keyboard stand.

Maybe I have misunderstood and you are talking about height between the lower and upper tier?

How about a combination of two below stand and 2nd tier accessory:

<a href="https://www.roland.com/global/products/ ... fications/" target="_blank">Roland KS-10Z</a>
Depth: 24-7/16 inches

and
<a href="https://www.guitarcenter.com/Proline/PL ... gLNXvD_BwE" target="_blank">Proline PL700T Add-on 2nd Tier for Keyboard Z Stand</a>

pa4x_user wrote:The PaAS speaker is self supported by the Pa4X (and is in fact higher than the base of the Pa4X so you can access the rear ports). It doesn’t need support from a keyboard stand.

Maybe I have misunderstood and you are talking about height between the lower and upper tier?

I am afraid you have misunderstood. The PA4X WITH the Speaker attached is 21" front to back so how would you put it on a two tier stand as the back bars of the Stand carrying the upper tier would not be possible with the speaker attached. That's why I would need a base that goes beyond the speaker

Got it. Maybe something like this.

https://on-stage.com/products/category/a-frame

Deleted

On stage heavy duty double x double tier will support it. The bottom tier is much deeper. Only issue ive had with that stand is that it doesnt go low enough for me as far as height.

pa4x_user wrote:Got it. Maybe something like this.

https://on-stage.com/products/category/a-frame

This is the most versatile and user-friendly format. I have used the old Ultimate Support A-frames for MANY years, maybe starting about 1980. I have several, even made one of my own out of spare parts. I have one for 61-note keyboards, and one for 76, and the one I custom built to hold any size.
They are light in weight, extremely durable, not expensive, and you can fold them and lay them on top of your other gear in a second for transportation, if you have room in the vehicle. If not, they come apart pretty easily.
You can add arms, mic booms, extensions, as needed.
Jasper also makes them.

delete

I have been using this stand since 2006 and never had a problem with having PASS attached live on stage.

Triton extreme, D-50 or X50 on top and Pa800/4X on bottom

https://www.k-m.de/en/products/keyboard ... 860-000-35

Sina wrote:I have been using this stand since 2006 and never had a problem with having PASS attached live on stage.

Triton extreme, D-50 or X50 on top and Pa800/4X on bottom

https://www.k-m.de/en/products/keyboard ... 860-000-35

Same here! I use it also for 6 or 7 years now.
Verry robust and nice design.

Pa4X on top, and a nord stage 2 HA88 on bottom.