Korg Forums

In combi mode i setting the drum track, that is okay.
I would like to another drum pattern. I setting the track number 2 with drum sound. I change the arpeggio “A” with drum pattern.
The midi ch. Is Gch, and if i started the arp On , then the arp drum track is running and listening .
But when i playing on keyboard then the drum sounds are listening.
I dont want listening the drums on keybed only want the arpeggio drums.
If i setting the MIDI ch. 10 then not listening the drum sounds on keybed when i pressing the keys, but not starting the arpeggio drum.
How can make two drum pattern in one combi?
Like then A014 Ambi Core combi preset have secondary drum track/pattern

Seems you are not familiar with ghost track arp.
To can play the arp pattern on different midi CH then Gch or Ch1(default):
Set the Arp A to play on track 16. Set the Track 16 to Gch and set the track status to off.
Set the arp A pattern on other track different midi ch then Gch. (Track 4 MIDI Ch4 for example). Will have the sounds from arp only not from key. If you need to have both must to set the Key On from Arp settings.

Please repeat the same procedure using Track 15, ARP B. Will have a possibility to use the arp B on any other MIDI CH then Gch (Ch1).
Conclusion: Track 15, 16 used as a ghost track (off) offer a possibility to have the arp free at any MIDI ch and can play independent then main sound.

Don't hesitate to ask more if you need.
Best,
Dan

Thank you Dan!

Thanks!