korg Volca bass vco pitch 2+3 issue
Posted: Thu Oct 28, 2021 12:49 pm
Hi
I turned on the Volca Bass for the first time in a while. Using the plug with no batteries.
I played a note and turned the VCO pitch knobs. 1 works as normal, but 2 and 3 do not. If I turn either way, the pitch does not follow the set tuning. Sometimes it will at the +12 mode on 3. Sometimes I turn the knob to the end, and it is out and drifts by itself, say a 1/4 step. The OFF position varies too. Rarely appears on the screen in the 12 o'clock position.
The numbers on the screen are all out of sync too as a result..
I also left it on for a bit and no difference.
Anyone have any ideas what this is or what I could do to fix it?
Here is a video:
When my finger points it is showing where the centre of the pot is placed in the off position which should be the 12 o'clock position.
https://flic.kr/p/2mEQokB
Cheers.
I turned on the Volca Bass for the first time in a while. Using the plug with no batteries.
I played a note and turned the VCO pitch knobs. 1 works as normal, but 2 and 3 do not. If I turn either way, the pitch does not follow the set tuning. Sometimes it will at the +12 mode on 3. Sometimes I turn the knob to the end, and it is out and drifts by itself, say a 1/4 step. The OFF position varies too. Rarely appears on the screen in the 12 o'clock position.
The numbers on the screen are all out of sync too as a result..
I also left it on for a bit and no difference.
Anyone have any ideas what this is or what I could do to fix it?
Here is a video:
When my finger points it is showing where the centre of the pot is placed in the off position which should be the 12 o'clock position.
https://flic.kr/p/2mEQokB
Cheers.