Is Service Manual avaliable somewhere?

[michelet]

I would make some diagnostic tests to my Triton Rack, but I'm stuck because I don't know where to start.

Please help!
Thanks

[ronf57]

I would make some diagnostic tests to my Triton Rack, but I'm stuck because I don't know where to start.
Thanks

Michele’s, I could only find KORG Triton service manuals/schematics for the non rack version.
So if like me you are attempting a lcd replacement it is frustrating as KORG and it’s recommended parts supplier no longer stock the display. If it is a different issue you have , send me an email with Triton Rack in subject and I send you the manuals I have.
Sorry but I hope this helps
Ron Finnerty
ronf57@aol.com

[michelet]

Thanks a lot Ron for your reply.
I succeeded finding the same manual you’ve got, but it’s for the keyboard version.
Luckily another kind user sent me, via Dropbox, the correct service manual that will do the job.
I don’t need to substitute the display yet and I hope it will last several years to come, I would check the overall integrity of Triton’s operating system, SCSI, some ROM expansions and MOSS, which were installed after having bought the expander itself.
Apparently they are recognised at startup, but I would go deeper..

By the way, if I knew that a virtual version of Triton was available (and then I bought it) I would avoid buying the hardware version…

Thanks and kind regards,
Michele

I would make some diagnostic tests to my Triton Rack, but I'm stuck because I don't know where to start.
Thanks

Michele’s, I could only find KORG Triton service manuals/schematics for the non rack version.
So if like me you are attempting a lcd replacement it is frustrating as KORG and it’s recommended parts supplier no longer stock the display. If it is a different issue you have , send me an email with Triton Rack in subject and I send you the manuals I have.
Sorry but I hope this helps
Ron Finnerty
ronf57@aol.com

[michelet]

Thanks to Martin H. I can provide the test mode procedures for the Triton Rack

How to start the test mode
[ENTER] + [5] + POWER ON : Full test
[ENTER] + [2] + POWER ON : Internal test is omitted
How to operate the test mode
INC : ITEM UP
DEC : ITEM DOWN
> : STEP UP
< : STEP DOWM
ENTER : Stepup ( proceed the test )
How to start the test mode or function other than the Triton Rack
[ENTER] + [3] + POWER ON : EXB-MOSS test
[ENTER] + [4] + POWER ON : SIMM FULL test
[ENTER] + [6] + POWER ON : EXB-SCSI test
[ENTER] + [7] + POWER ON : EXB-DI test
[ENTER] + [9] + POWER ON : Version indication
[ENTER] + [0] + POWER ON : Flash Memory Initialization
NOTE: When Flash Memory Initialization is executed, the preload data is erased.
H o w t o a d j u s t t h e c o n t r a s t
While operating the test mode, turning the Rotaly encoder enables you to
adjust the contrast of the LCD.
NOTE: Do not change the contrast while testing the Backup ROM at the internal test.
If it is executed, nothing is indicated in the LCD since the value of the contrast is
u p d a t e d a f t e r c o m p l e t i n g t h e t e s t .

[davidpecelunas]

I have a Triton Rack also. I would like the service manual. If possible can you please send me the link.