Page 1 of 1
Korg AX3000G jumping banks
Posted: Mon Apr 04, 2022 1:48 pm
by alopes
Hi guys
My pedalboard started skipping registers by itself without anyone touching it. Can anyone help me to find out what it will be?
Tanks in advance.
Posted: Mon Apr 04, 2022 5:25 pm
by voip
Has any liquid been spilt onto the device, or have any switches, or the case been damaged? Does the bank jumping happen if the AX3000X is picked up and turned upside down or held in other orientations? Is the connection to the AC adapter in good condition? Does wiggling the power cable alter the behaviour?
.
Posted: Tue Apr 05, 2022 9:20 am
by alopes
none of that. sometimes it skips register when I press the pedals, other times without touching the pedalboard. it's completely random. I already replaced the motherboard and the problem persists.
Posted: Tue Apr 05, 2022 1:13 pm
by voip
Check the panel PCB and interconnects for bad/dry solder joints. Also check the PCB ground plane to case connections are good.
This sort of issue could also be induced by interference e.g. from a strong radio transmitter/cellphone nearby, heavy machinery/aircon startup/switchoff, highly charged static electricity environment, poor earthing of the amplifier/rest of the audio chain. Try using the padalboard in another location, remote from where it's being used now, even resorting to using vehicle power via a DC/AC mains converter, if it helps.
.