New Modwave with jumpy VALUE Encoder

[zaphod betamax]

I have only had my Modwave since September 2021, and have only programmed about 100 custom patches from the front panel.

Using the VALUE encoder for small changes, say pitch and setting it to a value of 0.24 semitones, even at a slow rate of turning the encoder might jump way up to a super high value, say 10 or 100 or some other non- dialed in number.

The only connection I have is the MIDI clock input, and the jumpiness will happen whether or not I have this Midi cable connected.

Do I contact Korg Support for a RMA?

[zaphod betamax]

With some contact cleaner, this fixes the issue.