I just acquired a Trinity Pro X. As is my habit with any device that I buy used and ama able to, I do a factory reset. Except in this case, I discovered after the fact that I need a couple of floppy discs to restore the factory samples/settings.
I have downloaded the files from Korg, but I do not have a computer with a floppy drive to make the discs. Is it possible to use some SYSEX software to import those files via MIDI? I have never used any SYSEX software before, so the simpler the better. I am sure that is is something I can easily learn, just need some help getting started.
Current gear I am working with:
15' Surface Book 3, I7, 130 GHz, 32GB RAM, windows 11 64bit
PreSonus Studio 24C interface and of course a Trinity Pro X v 2.2.0
Thank you in advance for any help and suggestions. Any and all help is greatly appreciated.
Help with factory reset
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Richiebonds
- Posts: 3
- Joined: Tue Jan 03, 2023 6:38 am
Factory Sounds Reset
Visit reverb.com or keyboardkountry.com, they sell Korg factory preload floppy disk sets for the Trinity. But from what I've seen, they only load banks A and B on the Program sounds, and only A, B, and M on the Combination sounds. Banks C and D have no sounds in them after loading from these disks. I have been trying to find out how I can re-load to the factory original sounds in these banks ever since the in-board battery died in my Trinity V3, leaving me with no sounds at all. I have the original factory disks, but after loading them, I can't seem to load the above mentioned banks with the original factory sounds! So, you might exercise some caution before you overwrite the sounds on your board with the factory presets, or you might wind up with the same problem that I have run into. Hopefully I can get some help here on this forum.... Good luck, and enjoy your Trinity, it is such a great board! -R
I might be too late to help but I made a video that walks through restoring factory patches using sysex. Thanks!
https://youtu.be/PD75Fmrdl78
https://youtu.be/PD75Fmrdl78
-
debragraceperi
- Posts: 5
- Joined: Sat Jul 10, 2021 4:42 pm
Hello,nickle15 wrote:I might be too late to help but I made a video that walks through restoring factory patches using sysex. Thanks!
https://youtu.be/PD75Fmrdl78
Where can the sysex files for a korg trinity factory settings be found? I've looked and looked and can only find the floppy disk files.
Thanks!
-
samriccijr
- Full Member
- Posts: 118
- Joined: Thu Jan 01, 2004 11:13 pm
- Location: usa nj
Hi Paul, Debra and Everyone!
Here are the sysex files
Program A B
Combi AB
Prophecy Solo S 64 128
Drumkits 0-11
and Global
Set your Trinity to global channel 1.
Use MidiOx PC or Sysex Librarian Mac.
https://www.dropbox.com/s/5tkzm86dk08im ... X.zip?dl=0
I had the Solo version, not the Moss version.
Maybe a board member can dump their moss banks for us.
Sysex dumps are a good synth habit. Floppy drives will fail. Floppy disks attract magnets. I find myself recycling 10-20 year old floppy disks to backup my Karma, so a sysex dump is a little bit safer LOL!
Admin: It is ok to move these to the Trinity Downloads section.
Best, Sam in NJ USA
Here are the sysex files
Program A B
Combi AB
Prophecy Solo S 64 128
Drumkits 0-11
and Global
Set your Trinity to global channel 1.
Use MidiOx PC or Sysex Librarian Mac.
https://www.dropbox.com/s/5tkzm86dk08im ... X.zip?dl=0
I had the Solo version, not the Moss version.
Maybe a board member can dump their moss banks for us.
Sysex dumps are a good synth habit. Floppy drives will fail. Floppy disks attract magnets. I find myself recycling 10-20 year old floppy disks to backup my Karma, so a sysex dump is a little bit safer LOL!
Admin: It is ok to move these to the Trinity Downloads section.
Best, Sam in NJ USA