what are your thoughts on this

Asena · Post by **Asena** » Tue May 16, 2023 6:07 pm

https://ibb.co/Z2nNS2Q

https://ibb.co/MB6hVRJ

https://ibb.co/WnyXQd7

https://ibb.co/pXZqz35

Bachus · Post by **Bachus** » Sat May 20, 2023 4:52 pm

No clue about the idea behind this post?

Asena · Post by **Asena** » Sat May 20, 2023 7:25 pm

Hi Bachus, If you use the KB in 12 hrs, like me, the LEDS makes the buttons strange, Look at the pictures, It,s like cracked, or Damaged.

nitecrawler · Post by **nitecrawler** » Mon May 22, 2023 5:46 pm

Asena wrote:Hi Bachus, If you use the KB in 12 hrs, like me, the LEDS makes the buttons strange, Look at the pictures, It,s like cracked, or Damaged.

Asena: that is pretty weird. I have not had that problem on my board at all. Now I do not keep my board on 12 hours a day, but have had it on six or seven hours many times and no issue. Wish I could help. Is your environment hot or cold, damp or dry, clean or dusty?

Asena · Post by **Asena** » Mon May 22, 2023 6:17 pm

nitecrawler wrote:
Asena wrote:Hi Bachus, If you use the KB in 12 hrs, like me, the LEDS makes the buttons strange, Look at the pictures, It,s like cracked, or Damaged.
Asena: that is pretty weird. I have not had that problem on my board at all. Now I do not keep my board on 12 hours a day, but have had it on six or seven hours many times and no issue. Wish I could help. Is your environment hot or cold, damp or dry, clean or dusty?

Hi, Well its not only mine, lots of peope have the same issue, so Pls check your KB,s buttons again.
Its just in studio, not cold or hot.

nitecrawler · Post by **nitecrawler** » Mon May 22, 2023 10:07 pm

Asena wrote:
nitecrawler wrote:
Asena wrote:Hi Bachus, If you use the KB in 12 hrs, like me, the LEDS makes the buttons strange, Look at the pictures, It,s like cracked, or Damaged.
Asena: that is pretty weird. I have not had that problem on my board at all. Now I do not keep my board on 12 hours a day, but have had it on six or seven hours many times and no issue. Wish I could help. Is your environment hot or cold, damp or dry, clean or dusty?
Hi, Well its not only mine, lots of peope have the same issue, so Pls check your KB,s buttons again.
Its just in studio, not cold or hot.

Honestly, complete non-issue for me personally. No evidence of it on my keyboard at all. If, as you say "an issue for lots of peop", then maybe a bad batch of visual indicators. But, it is not universal.

Gflow · Post by **Gflow** » Wed May 24, 2023 5:25 am

I am experiencing same problem with some of my buttons.
I think this issue originated from a Facebook group for the PA5X.

rikkisbears · Post by **rikkisbears** » Wed May 24, 2023 6:00 am

Hi, hasn’t happened to mine, but, I don’t have mine running for hours at a time. Only 2 to 3 hours at a time . I switch off when I finish with it.
Sorry can’t help.

Dmkeys · Post by **Dmkeys** » Sun May 28, 2023 3:59 pm

I have the same issue. It started shortly after I bought the PA5X and my keyboard has never been on for that long at one time. There is clearly a quality control/manufacturing issue.

Asena (or anyone else with this issue), have you had a tech look at it to identify what parts need to be replaced?

rikkisbears · Post by **rikkisbears** » Sun May 28, 2023 8:26 pm

Hi,might be worth mentioning which model keyboard, I believe 88 note is made in Italy not Japan.

Dmkeys · Post by **Dmkeys** » Mon May 29, 2023 2:25 am

rikkisbears wrote:Hi,might be worth mentioning which model keyboard, I believe 88 note is made in Italy not Japan.

Mine is the 61 key and this issue showed up almost immediately after I got the keyboard.