Wavestate SE Platinum completely crashed (Website Software?)
Posted: Mon Nov 20, 2023 6:59 pm
Hi
We have a brand new Korg Wavestate SE Platinum which only hours after we put it in service completely crashed. We had a Wavestate MKI before so we are familiar with the Software updates and Sample Editor as well as the Library Software.
We wanted to get the Wavestate Software/Firmware from the Korg Website to get the Wavestate SE back running but realized that for the Korg Wavestate SE (Platinum is the same just in silver) there is no Software/Firmware available for download. Only for the MKII you find the 2.1.0 Firmware download.
We realized that the Wavestate SE comes with a 3.0.9 Software so it looks like the newer SE Wavestates have a different (or newer?) Software compared to the MKII? We also have the suspicion that the Raspberry PI inside the Wavestate SE is a different one compared to the MKII since they seem to use different Software Versions?
Anyway what happened is that we loaded a sample pack with the editor into the wavestate and after that was done the Wavestate SE crashed and is not working (kind of not working) any more. It is still starting up but in the loading progress of loading the soundbank it suddenly stops and on the Display you only see the word "Layer A" and the Wavestate is frozen an not reacting to any touch of any button. The only way out is to power it off. Any attempts to connect via Sample Editor or Librarian get us the message "Wavestate not connected" (while in the upper display it shwos the Wavestate connected). Any attempts to connect or Bootload (with the 2.1.0 Firmware and bootloader) fail.
Thats why we think the 2.1.0 is not the right Version for the SE. We think the newer SE is not allowing a connection with the 2.1.0.
Anyway we are kind of lost here and the unit seems to be fine, we even could get into the test mode and check all parameters which all work fine still we cant get back into the Wavestate any more.
Is there any way to get the Wavestate SE Firmware 3.0.9 with the boot loader or is there a way of deleting/emptying the wave files (samples) recently loaded since we think its crashing since in the Sample Editor we can see the 50MB memory is 49,7MB full and we guess thats why the wavestate always crashes on sound library startup.
Its kind of weird that you can crash/brick an Wavestate SE so easily with just loading Wave Sample Packs into the SE via Sample Editor.
We tried to talk with Korg Switzerland as well as Korg Germany but they told us they don't have any SE nor do they know anything about the 3.0.9 software or if the SE Versions have a different firmware so know we try this forum here hoping to reach somebody from Korg USA or JP or somebody with enough knowledge and experience to help us get our SE back and running.
Help is much appreciated[/img]
We have a brand new Korg Wavestate SE Platinum which only hours after we put it in service completely crashed. We had a Wavestate MKI before so we are familiar with the Software updates and Sample Editor as well as the Library Software.
We wanted to get the Wavestate Software/Firmware from the Korg Website to get the Wavestate SE back running but realized that for the Korg Wavestate SE (Platinum is the same just in silver) there is no Software/Firmware available for download. Only for the MKII you find the 2.1.0 Firmware download.
We realized that the Wavestate SE comes with a 3.0.9 Software so it looks like the newer SE Wavestates have a different (or newer?) Software compared to the MKII? We also have the suspicion that the Raspberry PI inside the Wavestate SE is a different one compared to the MKII since they seem to use different Software Versions?
Anyway what happened is that we loaded a sample pack with the editor into the wavestate and after that was done the Wavestate SE crashed and is not working (kind of not working) any more. It is still starting up but in the loading progress of loading the soundbank it suddenly stops and on the Display you only see the word "Layer A" and the Wavestate is frozen an not reacting to any touch of any button. The only way out is to power it off. Any attempts to connect via Sample Editor or Librarian get us the message "Wavestate not connected" (while in the upper display it shwos the Wavestate connected). Any attempts to connect or Bootload (with the 2.1.0 Firmware and bootloader) fail.
Thats why we think the 2.1.0 is not the right Version for the SE. We think the newer SE is not allowing a connection with the 2.1.0.
Anyway we are kind of lost here and the unit seems to be fine, we even could get into the test mode and check all parameters which all work fine still we cant get back into the Wavestate any more.
Is there any way to get the Wavestate SE Firmware 3.0.9 with the boot loader or is there a way of deleting/emptying the wave files (samples) recently loaded since we think its crashing since in the Sample Editor we can see the 50MB memory is 49,7MB full and we guess thats why the wavestate always crashes on sound library startup.
Its kind of weird that you can crash/brick an Wavestate SE so easily with just loading Wave Sample Packs into the SE via Sample Editor.
We tried to talk with Korg Switzerland as well as Korg Germany but they told us they don't have any SE nor do they know anything about the 3.0.9 software or if the SE Versions have a different firmware so know we try this forum here hoping to reach somebody from Korg USA or JP or somebody with enough knowledge and experience to help us get our SE back and running.
Help is much appreciated[/img]