Power for Triton Rack
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Power for Triton Rack
Hi
Does anyone know if I can use a Triton Rack purchased in the USA (110 volts) in Australia (240 volts) just straight, as is, or do I need a step-down transformer?
I have read in these forums that the Triton keyboards all have a universal power supply that senses the incoming voltage and switches accordingly.
Is it the same on the Triton Rack?
Any advice appreciated,
Thanks,
Volker
Does anyone know if I can use a Triton Rack purchased in the USA (110 volts) in Australia (240 volts) just straight, as is, or do I need a step-down transformer?
I have read in these forums that the Triton keyboards all have a universal power supply that senses the incoming voltage and switches accordingly.
Is it the same on the Triton Rack?
Any advice appreciated,
Thanks,
Volker
Hi
Thanks for answering.
Yes, I am getting a step down transformer.
I also own a Korg Karma (bought here in Australia). Apparently it uses the same power supply that the Triton Rack was supplied with when it was sold here in Australia (model KA165).
But I am about anxious about using the Australian Power Supply (rated 9.0 volts at 3 amps) with the USA Triton Rack (whose power supply is rated 9.0 volts at 4.2 amps - model KA173).
Does anyone have any advice on this?
If I was able to use the Australian Power Supply it would make life easier.
Thanks
Volker
Thanks for answering.
Yes, I am getting a step down transformer.
I also own a Korg Karma (bought here in Australia). Apparently it uses the same power supply that the Triton Rack was supplied with when it was sold here in Australia (model KA165).
But I am about anxious about using the Australian Power Supply (rated 9.0 volts at 3 amps) with the USA Triton Rack (whose power supply is rated 9.0 volts at 4.2 amps - model KA173).
Does anyone have any advice on this?
If I was able to use the Australian Power Supply it would make life easier.
Thanks
Volker
I recently bought a rack from the UK - and I think he originally got it from the US.
It has the same korg 110V powersupply with an american type plug, and then an extra converter/powersupply bought in the UK.
That works fine, and I don't think it's a Korg brand...just a standard converter to 220/240V.
Additionally you can take your rack to an electrician and get him to make an "inside converter" so you don't need to carry 2 adaptors around.
For live use that would be optimal.
/Morten
It has the same korg 110V powersupply with an american type plug, and then an extra converter/powersupply bought in the UK.
That works fine, and I don't think it's a Korg brand...just a standard converter to 220/240V.
Additionally you can take your rack to an electrician and get him to make an "inside converter" so you don't need to carry 2 adaptors around.
For live use that would be optimal.
/Morten
Hi Sandager
Yes, I ended up buying a step-down transformer box just to be on the safe side.
So, for the record, the box I bought "steps down" the voltage from the house (240 volts) to the voltage required by the USA Korg Power Supply (110 volts).
I plug the Triton Rack into the USA Korg Power Supply and then that power supply into the transformer and then that into the wall socket.':shock:'
The transformer I got is rated at 100 watts and that seems to work well.
Volker
Yes, I ended up buying a step-down transformer box just to be on the safe side.
So, for the record, the box I bought "steps down" the voltage from the house (240 volts) to the voltage required by the USA Korg Power Supply (110 volts).
I plug the Triton Rack into the USA Korg Power Supply and then that power supply into the transformer and then that into the wall socket.':shock:'
The transformer I got is rated at 100 watts and that seems to work well.
Volker
The model KA165 is the one that works for the Triton Rack as well as the Karma.
You could go into your local korg shop and buy another model KA165 and use that on your rack or karma and get rid of the step down convertor.
But make sure you tell the shop it is for your Karma not your US rack.
You could go into your local korg shop and buy another model KA165 and use that on your rack or karma and get rid of the step down convertor.
But make sure you tell the shop it is for your Karma not your US rack.
Oasys 88, 2 gig ram, EXB-DI and all the current expansions. VIRUS TI Desktop, Protools Horizons and SSL Bundles
Volker,
It works fine that is the power supply that comes with the Korg Triton Rack in Australia.
I have one on my Rack which I purchased in USA.
I my old life i used sell korg and had to order replacement power supplies and that is the one for the rack and the keyboards.
We used grab power supplies off the original tritons and karma's, and racks all the time. It is the same power supply.
It works fine that is the power supply that comes with the Korg Triton Rack in Australia.
I have one on my Rack which I purchased in USA.
I my old life i used sell korg and had to order replacement power supplies and that is the one for the rack and the keyboards.
We used grab power supplies off the original tritons and karma's, and racks all the time. It is the same power supply.
Oasys 88, 2 gig ram, EXB-DI and all the current expansions. VIRUS TI Desktop, Protools Horizons and SSL Bundles
I will never understand the reason why the Triton Rack has an external power supply.
Take for example the Lexicon MPX-1 DSP: it has an INTERNAL power supply and you can use it EVERYWHERE, because it will accept ANY voltage between 100 and 240 VAC, 50 or 60 Hz.
This is, in my opinion, the only (technical) stain into this wonderful sound machine.
Jacofan - Italy
Take for example the Lexicon MPX-1 DSP: it has an INTERNAL power supply and you can use it EVERYWHERE, because it will accept ANY voltage between 100 and 240 VAC, 50 or 60 Hz.
This is, in my opinion, the only (technical) stain into this wonderful sound machine.
Jacofan - Italy
jacofan - I totally agree. I could undertstand it with the 1U TR Rack, but it seems unlikely it couldn't have been built into the Triton Rack with a voltage switch. Other reasonably priced units managed to have it!
On the power adaptor front - I move my Korg gear between UK & South America so I bought a set of original Korg adaptors for each unit from the local importer/distributor to be sure of having the correct voltage in & out... it wasn't too expensive and I'd much rather do that than using a bunch of transformers or trying generic adaptors.
In fact I was very pleased & impressed to find that the distributor had all the models required in stock and weren't charging over the odds.
On the power adaptor front - I move my Korg gear between UK & South America so I bought a set of original Korg adaptors for each unit from the local importer/distributor to be sure of having the correct voltage in & out... it wasn't too expensive and I'd much rather do that than using a bunch of transformers or trying generic adaptors.
In fact I was very pleased & impressed to find that the distributor had all the models required in stock and weren't charging over the odds.
{owner of Korg Triton Rack, EM-1, ESX-1, KP2, KP3, Legacy Analog 2007 & t-shirt}
Well, Milkojnr already stated the obvious reason; for the unit to be reasonably priced, it's way easier to have an external PSU. External PSU can and will also perform better than any internal switching supplies would, if done right.
It's not that the internal PSU was not possible to apply, but that certainly would've also changed the whole layout and hence the price.
I wouldn't choose this synth with worse performance or noticeable higher price just for the convenience of a switching supply, even if given the chance...some would?
It's not that the internal PSU was not possible to apply, but that certainly would've also changed the whole layout and hence the price.
I wouldn't choose this synth with worse performance or noticeable higher price just for the convenience of a switching supply, even if given the chance...some would?