Korg Forums

Hi there - I've posted on the NI site (HERE), and it 's been suggested to post here for further help.....

Let me set the scene -

Mac setup with a Zero4. Technics 1210s and CD deck.

CH1 - 1210
CH2 - output from Mac/Traktor
CH3 - CD deck
CH4 - unused

I'm getting perfect sync etc.

However, to hear the output from Traktor on CH2, I have to set the selector to MIDI. I'm getting audio metering on by the fader - but output can only be heard with the MIDI selected.

Surely, this should be heard through "Audio".....

Am I doing anything wrong, or is there a bug as suggested at NI?

Dan

Hello mate!!!

Just following on from Scobbys message, it turns out that we can get an output from the audio input.. but strangly only when the individual channels are up to maximum (10). i.e there is no volume control ability on the individual channels within the zero 4!!!
I've installed the new version of firmware (1.5) still no joy!!!

Starting to tare my hair out now!!!

Any help would be great!!

Setup: imac 2.4
Technics 1210s, Zero 4, T.S version 1.1