Page 1 of 1
Pa1X korg os update problem help plaease
Posted: Sun Feb 24, 2008 3:25 pm
by peyman1354
hi ..im new to this forum.
i just bought my pa1x ..and was so happy till 2day..
i tried to update my os and first i updated Musical Resources - Version 3.00 trough my usb port stright putting in hard disk,,everything goes right but after turning my keybored on it says loding factory resourses please wait..its nearly 5 hours now and nothing..the keybored os not coming up..
my os version is 2.54,,,
so i dont know what to do..is there any reset butoon to put the keybored in the defult factory sys?
can some one help me please,,thnx
Posted: Sun Feb 24, 2008 3:32 pm
by kjeld
You first have to reinstall your OS to Ver. 3.0 (Minimum)
After that, you can put in the Resources 3.00
OS 2.54 do not work with Resources 3.00
Please look at this link:
http://www.korgforums.com/forum/phpBB2/ ... hp?t=32276
Hope it help you.
Kjeld
Posted: Sun Feb 24, 2008 3:51 pm
by peyman1354
tnx for the fast reply...but the problem is my keybored its not coming up 2 go and enable usb for hard drive..its kind of freezinig...so dont no what to do
Posted: Sun Feb 24, 2008 5:30 pm
by Mickb
you need to load the OS version 3.0 using the floppy disc you can download it from the korgpa.com site
what you need to do is
1) download the files and create the 4 discs for the OS install
2) put floppy 1 into the floppy drive and switch on the PA1X keeping the intro1 button pressed
3) follow the prompts asking for each disk as needed
when complete then install the music resource disks
the link in the earlier post by kjeld gives a more detailed discription of the procedure
hope this helps
Regards
Mick
Posted: Sun Feb 24, 2008 7:34 pm
by peyman1354
Mickb wrote:you need to load the OS version 3.0 using the floppy disc you can download it from the korgpa.com site
what you need to do is
1) download the files and create the 4 discs for the OS install
2) put floppy 1 into the floppy drive and switch on the PA1X keeping the intro1 button pressed
3) follow the prompts asking for each disk as needed
when complete then install the music resource disks
the link in the earlier post by kjeld gives a more detailed discription of the procedure
tnx...i did it and everything is fine..tnx 2 all for helping me
hope this helps
Regards
Mick
Posted: Mon Feb 25, 2008 12:23 am
by karmathanever
...yes, as the guys are saying here, press the "
Intro1" button
INSTEAD of the "OK" on the screen for OS diskette #1 - this will clear your PA1XPro before loading the OS and resources.
Hope you have some success...
(Please also consider that your OS or Resources download could be corrupted - try a fresh download, use different diskettes etc... this will at least eliminate those issues)
Keep us informed how you go..
Cheers
Pete
Posted: Mon Feb 25, 2008 8:15 am
by wittid
Mickb wrote:2) put floppy 1 into the floppy drive and switch on the PA1X keeping the intro1 button pressed
Regards
Mick
only for correction
keep the button not pressed if you power on - that´s wrong !!!
press the button "Intro 1" if "Press OK" at the screen appears - not earlier or later. Means press "Intro1-Button" instead of ´"OK" in the screen.
cu
Detlef
