Page 1 of 1
Restore factory settings on KORG POLY-61 M ???
Posted: Tue Apr 08, 2008 8:29 pm
by Motown
I am desperately trying to find out how to restore the factory settings on my KORG POLY-61M.
Can anyone assist?
Much appreciated!
- JP
Posted: Thu Apr 10, 2008 12:00 am
by MadDonna
I would start with reading the manual, it's clear enough how to do it. Then I should use google to find the original soundfile (what was original on tape). So first:
- manual,
http://www.synthmania.com/poly-61m.htm +
http://www.synthesizer.at/download/download.htm#
- sound file
if you have that we talk further. But if you take time to read the instruction manual, you will find it out for yourself, if I type it here you will have to read it too.
Posted: Mon Apr 14, 2008 8:33 pm
by Motown
Mad Donna - Obviously, I started with the User Manual first. I saw nothing in there pertaining to restoring the factory settings. That's what led me to post here looking for assistance, on KORG'S recommendation.
You seem to be familiar with that user manual, so......how about providing me the page number that info can be found on??
That would be super!
Thanks
- Motown
Posted: Mon Apr 14, 2008 9:38 pm
by MadDonna
It starts on page 88 of the user manual, 86 if you use the counter from adobe. In chapter 8.4 starts the section how to load data from the tape, the initial sounds are done exactly the same.
Posted: Tue Apr 15, 2008 12:15 pm
by Motown
Okay - that's what I thought, but wasn't sure.
THANK YOU, MadDonna! 
- Motown
Posted: Tue Apr 15, 2008 12:53 pm
by MadDonna
Motown wrote:Okay - that's what I thought, but wasn't sure.
THANK YOU, MadDonna!
- Motown
Have fun! The Poly 61 is a cool machine.