Korg Forums

Hi Korg-Forums,

i have an M3-88 with the EXB-Radias. I love the Radias so much that i am thinking of adding a Radias Rack to it - Thanks to Korg Komponent System i can add it to the "Frame" of the M3 88 Keybed.

Well, thats my Question.


I don't want to remove my EXB Radias or sell it.
I think maybe i can couple the EXB Radias and the Radias Rack via Midi to create weired Sounds

Thanks, Andreas

Yes, you can add a radias rack to your M3-88. You just need the M3 MAT tray, M3 MAL Hinge and cable.

Im thinking of doing the same but the other way around. I have the radias rack in my M3-73 and thinking of putting in the Radias-EXB.

Allright, thank you!

ZOID, you have a Radias Rack in your M3, how are they connected ?

I ask myself how you switch between them because you have a Keybed for both.

The Radias is connected to the keyboard with a small cable as the M3. If you look under the keybed you see two connectors. They use the keyboard together, meaning if you only want to play only one of them, you have to turn down the volume on the other. The other way is to connect the radias via MIDI only.

fantasio wrote:Allright, thank you!

ZOID, you have a Radias Rack in your M3, how are they connected ?

I ask myself how you switch between them because you have a Keybed for both.

Or don't connect the keyboard and use a MIDI out from the M3 to the MIDI in on the Radias. You can then select MIDI 'ext' to play the Radias from the keyboard (and control it from the sequencer).