Korg Forums

Hi

if you are using a volumepedal with you PA2X pleace try performence
Accordion Paris Musette or Guitar Grand Nylon,and weil using aftertouch
try to work with the volumepedal.

I got this problem with my 2 PA2X and my 2 Yamaha FC-7 volumepedal in a specifik angel of the pedal and using aftertouch the upper sounds total mute

I would like to know if you got the problem ? or not? and what kind of volumepedal you are using ?

And yes I have calibreat the pedals in global

Thanks
Torben

Hi

I use a Behringer FCB1010 MIDI pedal for my expression control - no problems at all..

Cheers

Pete

Thanks Pete

I think the Behringer FCB1010 MIDI pedal control the expression control by midi.Nice to known it is working

I would like to know if some of you use a volumepedal connected to
pedal assignabel input on the Pa2x

Torben

Hi Torben. I Use a Zum VM-13 Expression/Volume Pedal to the assignable input and have no problems at all.

No, the Behringer pedal uses the Pedal Input jack, just like the Korg EXP-2. They both work fine.

jg::

````

jg:: wrote:No, the Behringer pedal uses the Pedal Input jack, just like the Korg EXP-2. They both work fine.

jg::

````

Hi jg,

Maybe you are talking about some other Behringer pedal?

However, the two continuous (large) foot pedals on the Behringer FCB1010 are programmable MIDI controllers and are connected via MIDI cable to the keyboard's MIDI IN socket.

Two of the smaller on/off foot switches (not continuous) can be configured to switch contacts which can be connected up to pedal input jacks via TS jack plug leads.

Best regards,
Rob

Yes I'm sorry, I was talking about the Behringer expression pedal, which can be used instead of the Korg EXP-2. Sorry for confusion, over and out...

jg::