work around for the meters zero 8
Posted: Sat Aug 14, 2010 1:32 pm
Hello all!
Looks like I found a fix for the meters not working on the korg zero 8. I figured this put when I was doing a teardown to fix my kpad.
So what your going to want to do is grab a Alan key and remove the 4 screws that hold the plexiglass down over the meters.
[/img]http://gallery.me.com/iphone/twarble/100030#0[img]
There are two screws that are white plastic. They are located next to the yellow firewire led. These are the adjustments for the meters. Use a small Phillips screwdriver to adjust them.
You will have to calibrate them to the type use you plan to use them for. If done incorrectly the meters will max out when not inteded to.
Good luck!! Simply put it's not my fault if you mess up in any way!!
This was written from my iPhone, sorry for misspellings.[/img][/list]
Looks like I found a fix for the meters not working on the korg zero 8. I figured this put when I was doing a teardown to fix my kpad.
So what your going to want to do is grab a Alan key and remove the 4 screws that hold the plexiglass down over the meters.
[/img]http://gallery.me.com/iphone/twarble/100030#0[img]
There are two screws that are white plastic. They are located next to the yellow firewire led. These are the adjustments for the meters. Use a small Phillips screwdriver to adjust them.
You will have to calibrate them to the type use you plan to use them for. If done incorrectly the meters will max out when not inteded to.
Good luck!! Simply put it's not my fault if you mess up in any way!!
This was written from my iPhone, sorry for misspellings.[/img][/list]