Hi, i like this magic fly preset on youtube http://www.youtube.com/watch?v=8RkeejuReXM Can anyone share this R3 Patch ?
thanks and best regards .... spinatze
Magic Fly Patch R3 ?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Magic Fly Patch R3 ?
Korg Kronos 61
-
axxim
- Platinum Member
- Posts: 665
- Joined: Thu Sep 17, 2009 3:42 pm
- Location: Freiburg/Germany
- Contact:
Well, this is very easy and you have more than 1 options:
Option A:
1. You download the YT-Video to your PC
2. Extract the Audio to MP3
3. Buy or download a Spectrum analyzer and extract each frequency response in the time domain up to the 16th harmony
4. Download or buy a program like MathLab (ML)
5. Enter the extracted frequency data on a table
6. Create 2 waveform function in ML (maybe saw and pulse)
7. Programm two lowpass filters in ML and apply the waveforms to them
8. Change the filter coefficients in ML until they match the frequency table in 3.
9. Take those values and transcribe them to the parameter settings of your R3
Option B:
1. You ask the YT-author to give you that patch
Option C:
1. You pay someone to do that work for you (I would take about 599,95 EUR because I would have to buy the R3)
Option D:
1*. you take a look at this forums for some links to synth programming tutorials in the web
2. You open the R3 Sound Editor and try to get that sound by yourself on the R3.
* Alternatively to 1, you can search for synth programming tutorials by yourself in the web, using keywords like "substractive synthesis", "Basics of synthesizer" etc.
If you choose option D, you can show here your progress and someone surely will help if you are stuck anywhere with it. Besides all you will learn to program a synthesizer like we did.
Option A:
1. You download the YT-Video to your PC
2. Extract the Audio to MP3
3. Buy or download a Spectrum analyzer and extract each frequency response in the time domain up to the 16th harmony
4. Download or buy a program like MathLab (ML)
5. Enter the extracted frequency data on a table
6. Create 2 waveform function in ML (maybe saw and pulse)
7. Programm two lowpass filters in ML and apply the waveforms to them
8. Change the filter coefficients in ML until they match the frequency table in 3.
9. Take those values and transcribe them to the parameter settings of your R3
Option B:
1. You ask the YT-author to give you that patch
Option C:
1. You pay someone to do that work for you (I would take about 599,95 EUR because I would have to buy the R3)
Option D:
1*. you take a look at this forums for some links to synth programming tutorials in the web
2. You open the R3 Sound Editor and try to get that sound by yourself on the R3.
* Alternatively to 1, you can search for synth programming tutorials by yourself in the web, using keywords like "substractive synthesis", "Basics of synthesizer" etc.
If you choose option D, you can show here your progress and someone surely will help if you are stuck anywhere with it. Besides all you will learn to program a synthesizer like we did.
_/\_><_><_|_//,_
Only a Radias, VP-770, SP-170S and iPad2
http://www.axxim.de/r3dias
https://www.youtube.com/channel/UCyi189 ... UTEpsykkIg
Only a Radias, VP-770, SP-170S and iPad2
http://www.axxim.de/r3dias
https://www.youtube.com/channel/UCyi189 ... UTEpsykkIg
spinatze wrote:@axxim: you are so funny ......
what's with the periods at the end? it should be an exclamation.
Current: MS-20 Mini, Minilogue, SY77
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886