Korg Forums

OK I know this is gotta be a huge topic, but I have to ask because I'm not sure what is the best way to go about this.

First I have to ask a question:

I've loaded some back track (.wav) that I want to play along with and assigned it to a specific key. Is there any way to make it play without having to hold the key?

Second, here's what I want to do:

I want to fire that sample by pressing a key, then play along with it. So I obviously need one key assign to firing up the sample (at the far left) and the rest of the keybed mapped to, say, a piano sound.

What is the best way to go about this? Can I create a program that will do this or does it have to be a combi? Should I use the sequencer and load an audio track instead? At the end of the day, I obviously want to use that setup and import it in the setlist.

Any advise on this would be highly appreciated.

Best regards,

Is there a specific reason why it has to be a key, as opposed to the "start" button of the sequencer?
If not, by far the easiest way would be to load it as an audio track.

Yes, this is for a live gig use. When I move to that "scene" in the set list, I'd rather have to press one note then press several buttons on the control surface to activate sequencer and fire it.

The less operations, the better.

But with the Kronos, you can put a song in a set list just like a combi or program. So you just click the setlist slot and press the start button. Only difference is pressing the start button instead of a key.

Oh, I see...

Any advantage of using the sequencer over a combi/prgm in general? Would it show limitations down the road?

Well one advantage I can think of would be not having to create a sample based program and then a combi to create a split just to trigger your sample.
You just copy your program or combi to the sequencer and load the audio track. Seems much simpler to me.

Ok here's what I've done:

-Created samples from .WAV and saved to internal disk (checked)

Now, I'm following the manual on how to import an audio track in the sequencer:

-Go to the P4: Track Edit page (checked)

-Use “Track Select” to select the audio track in which you want to place the WAVE file. (If there's no such thing anywhere on the screen I assume it means pointing on the screen the desired track) (checked)

-Choose the “Audio Event Edit” page menu command to open the dialog box.

????

Where's that? I can see the picture of the screen in the manual, but I can't find how to bring it up! Geeze am I blind or something? lol Darn, there will be no easy one I guess.

Help plz

SanderXpander wrote:Well one advantage I can think of would be not having to create a sample based program and then a combi to create a split just to trigger your sample.
You just copy your program or combi to the sequencer and load the audio track. Seems much simpler to me.

You sir are absolutely right. Now that I got the idea, it seems the best way to do this.

Dniss wrote:Ok here's what I've done:

-Created samples from .WAV and saved to internal disk (checked)

Now, I'm following the manual on how to import an audio track in the sequencer:

-Go to the P4: Track Edit page (checked)

-Use “Track Select” to select the audio track in which you want to place the WAVE file. (If there's no such thing anywhere on the screen I assume it means pointing on the screen the desired track) (checked)

-Choose the “Audio Event Edit” page menu command to open the dialog box.

????

Where's that? I can see the picture of the screen in the manual, but I can't find how to bring it up! Geeze am I blind or something? lol Darn, there will be no easy one I guess.

Help plz

I must have missed a step somewhere, if someone would be kind enough to walk me through the process, I think I'll be OK for a little while...

Sadly I don't actually have my Kronos yet!

Anyone want to take this?

OK, when you're on the TRACK EDIT page you'll see the top half of the matrix is blue (MIDI) and the bottom brown/gold (AUDIO). Touch on the first brown line. This is AUDIO TRACK #1. Now go to the top right corner and you'll see a down arrow. This is the drop down box or page menu. You will see AUDIO EVENT EDIT.

Busch.

SanderXpander wrote:Sadly I don't actually have my Kronos yet!

Anyone want to take this?

When you get it, you will understand what kind of ordeal I'm going through here. Don't get me wrong, I love everthing about this unit, but the menus have a neverending list of submenus and subsubmenus.

lol it's nuts!

burningbusch wrote:OK, when you're on the TRACK EDIT page you'll see the top half of the matrix is blue (MIDI) and the bottom brown/gold (AUDIO). Touch on the first brown line. This is AUDIO TRACK #1. Now go to the top right corner and you'll see a down arrow. This is the drop down box or page menu. You will see AUDIO EVENT EDIT.

Busch.

Ahhhhh I was on the midi section! lol

Now that I know, it's so simple, it's almost embarassing...it almost bit me in the ass, so obvious.


Thank you very much burningbusch! Very kind of you.

SanderXpander wrote:Well one advantage I can think of would be not having to create a sample based program and then a combi to create a split just to trigger your sample.
You just copy your program or combi to the sequencer and load the audio track. Seems much simpler to me.

Thanks for the suggestion btw. It got 90% of my questions out of the way.

The huge advantage of using audio tracks in the sequencer is that they're streamed from the SSD. When you load an audio sample and trigger it from the keyboard, it must be loaded into RAM. Obviously you have much less RAM available vs. SSD. Plus RAM-based samples have a load time where as the streamed audio is instant.

Busch.