Korg Forums

Hello All,

I connected my:

Kaoss Pad 3 midi out to Korg R3 midi In and Korg R3 midi Thru to Virus Indigo midi In

I set Kp3 such Master and R3 and Virus such Slave. The R3 is in sync, but the R3 doesn't pass the Kp3 midi clock to virus through midi thru.

Instead if I use KP3, Virus and R3 final, the Virus can pass the midi clock through thru port to R3.

Why this?
What i must to do to pass the midi clock through Korg R3 Trhu port?

Ciao
Peewee

Welcome gruverino!

I'm not really sure, but I remember there was something like enabling/ disabling control data and others in some menu and not sure if it was for the MIDIs or USB and if it was the R3. Did you searched in the users manual?

Normally MIDI Thru is just a straight 1-1 connection from the In and doesn't even pass through any data process or processor.
Have you checked that it passes through CC & Note data okay?

Thanx alot friends.

So i tried to set every possibility.
Enabling or disabling cc, note, sysex ect. And changing midi route and midi clock mode, naturally to ext midi sync or auto. But from the thru doesn't pass the midi clock.
Now i ask me, my R3 is damaged? Or the korg r3 don't send the midi clock by thru, from midi in normally?

Bye bye bye

Funkyfie your soul.