Tip: Program Change to external keyboard
Posted: Thu Aug 23, 2012 10:09 pm
Hello all,
When i was trying to send program changes from my Kronos to my Nord i faced some problems i couldn't directly solve. Lucikly after some time I found the solution so i thougt i would share it here:
First select the timbre in your combi/seq form where you want to send the prog change
In timbre parameter 'midi' set te channel right (mus be same as the receiving channel, in my case the Nord)
Choose EXT 2
Set MSB/LSB right (see operation manual of you external device, in my case 00/00
Now you can choose the prog change number (0-127) in the mixerscreen, where normally you can select a patch
Now, most important in my situation: in Global Mode in the midi screen you must UNCHECK 'bank change' under 'midi filter'. I think this is specific for the Nord
When i was trying to send program changes from my Kronos to my Nord i faced some problems i couldn't directly solve. Lucikly after some time I found the solution so i thougt i would share it here:
First select the timbre in your combi/seq form where you want to send the prog change
In timbre parameter 'midi' set te channel right (mus be same as the receiving channel, in my case the Nord)
Choose EXT 2
Set MSB/LSB right (see operation manual of you external device, in my case 00/00
Now you can choose the prog change number (0-127) in the mixerscreen, where normally you can select a patch
Now, most important in my situation: in Global Mode in the midi screen you must UNCHECK 'bank change' under 'midi filter'. I think this is specific for the Nord