Page 1 of 1

Taking song from Seq mode and make it a Wav.

Posted: Tue Jan 01, 2013 9:44 pm
by hammondcuni
Can I take a song from Seq mode and make it a wav to move to computer and burn CD like i do on my M3? Or will the Audio Files not allow this?
Thanks

Posted: Tue Jan 01, 2013 9:54 pm
by Mike Conway
In Sequencer mode, press the AUDIO IN/SAMPLING tab. Select the dropdown menu (upper right screen) and select BOUNCE ALL TRACKS TO DISK.

Posted: Tue Jan 01, 2013 10:28 pm
by AlchemistMusicStudio
How to record an audio file?

1. Go to the SEQ mode.
2. Select the Audio In / Sampling tab.
- Sampling Setup: Trigger = Sequencer START SW
- Sampling Setup: Save To = DISK
- Sampling Setup: Mode = STEREO
- Sampling Setup: Sample Time = e.g.: 5 min
4. Press the REC switch (SAMPLING), and then press the START/STOP switch (SAMPLING)
5. Press the START/STOP switch (SEQUENCER) to begin recording.
6. To stop recording, press the START/STOP switch (SAMPLING) once again.
7. Go to the DISK mode.
8. Select the file (audio).
9. Press the START/STOP switch (SAMPLING).

Image

Image

Posted: Tue Jan 01, 2013 11:09 pm
by hammondcuni
Ok that is how I was doing it with M3( illustration). I guess the CD/RW drive option is easier but with same results? So i can put song with Audio tracks(files) into usb correct?

Posted: Tue Jan 01, 2013 11:37 pm
by AlchemistMusicStudio
hammondcuni wrote:Ok that is how I was doing it with M3( illustration)
M3? :-k It was the KRONOS...
hammondcuni wrote:So i can put song with Audio tracks(files) into usb correct?
Yes, You can. Use the Copy and Paste commands (the DISK mode and the Utility tab).

Posted: Wed Jan 02, 2013 12:03 am
by Ksynth
You can also transfer your finished wave by FTP rather than USB.

Posted: Wed Jan 02, 2013 12:13 am
by hammondcuni
Thanks AMS good illustration. What I meant was that on the M3 the process is very similar.

Posted: Wed Jan 02, 2013 3:00 am
by hammondcuni
Got it.. Thanks to all.