Problem with my pa3x
Posted: Tue Jan 08, 2013 10:36 am
My Pa3x is around 3 and a half months old and im having a strange problem that keeps happening quite often but not regularly.
i'm currently on Os 1.5
The problem is when i switch on my keyboard and after its done booting when i push the main volume slider up i get a big pop on my speakers, like the one that you get when you unplug a cable when the channel is on, and there is absolutely no audio. The only way the audio comes on is by putting the keyboard on standby and then switching it back on. This has happened to me now at least 5 times now since i bought it in September 2012.
Lately a similar thing happened to me again but this time it was with my mp3 s. The sound from my keyboard would come but if i tried to play the mp3 s, it would show in the player that the file is playing, but no audio from it and yes my mp3 volume fader was up and i did bring it up and down twice to reset it and see if the problem was wit the fader not being reset. The balance fader was also in the middle position. I had to put the keyboard on standby and then switch it on for the audio to come. This happened to me when i was in the middle of a fast set and people were on the floor and it was really annoying for everyone to wait for more than a minute for the keyboard to come on and start with the music again.
Another issue i have is with the battery. When it is fully charged it shows the backup time to be 137 hours but it doesn't even last six hours. So if i turn the keyboard on after six hours it takes its normal 3 minutes to start up which is really frustrating.
I don't know if i'm the only one with these problems. And i don't know what to do cause it doesn't happen every time, but quite often.
Please suggest and advice what i need to do.
One more thing, i have my maxx audio volume set to 4.The EQ and all the other settings are all off. Could it be the maxx audio that is giving me the audio problems????
Please help.
i'm currently on Os 1.5
The problem is when i switch on my keyboard and after its done booting when i push the main volume slider up i get a big pop on my speakers, like the one that you get when you unplug a cable when the channel is on, and there is absolutely no audio. The only way the audio comes on is by putting the keyboard on standby and then switching it back on. This has happened to me now at least 5 times now since i bought it in September 2012.
Lately a similar thing happened to me again but this time it was with my mp3 s. The sound from my keyboard would come but if i tried to play the mp3 s, it would show in the player that the file is playing, but no audio from it and yes my mp3 volume fader was up and i did bring it up and down twice to reset it and see if the problem was wit the fader not being reset. The balance fader was also in the middle position. I had to put the keyboard on standby and then switch it on for the audio to come. This happened to me when i was in the middle of a fast set and people were on the floor and it was really annoying for everyone to wait for more than a minute for the keyboard to come on and start with the music again.
Another issue i have is with the battery. When it is fully charged it shows the backup time to be 137 hours but it doesn't even last six hours. So if i turn the keyboard on after six hours it takes its normal 3 minutes to start up which is really frustrating.
I don't know if i'm the only one with these problems. And i don't know what to do cause it doesn't happen every time, but quite often.
Please suggest and advice what i need to do.
One more thing, i have my maxx audio volume set to 4.The EQ and all the other settings are all off. Could it be the maxx audio that is giving me the audio problems????
Please help.