Korg Forums

from the user manual :

Editing User Sample Banks

At any time, you can load a User Sample Bank’s data
into Sampling Mode and edit the Samples or
Multisamples as desired, or add new Samples or
Multisamples. To do so:
1. Go to the folder in which you’ve saved your KSC
from “Saving User Sample Banks,” above.
2. Select the “[name].KSC” file—the one without
“UserBank” in the name.
3. Press the Load button.
The Load KSC dialog will appear.
4. Set .KSC Allocation to Clear Sampling Mode Data.
This is important, in order to preserve the User Sample
Bank ID. For more information, see “User Sample Bank
IDs,” below.

first problem : under the screen a red message say that name.ksc is already loaded as a user sample bank, set ksc allocation to clear all

but this is not as sayd in point 4

what can I do ? I do all the things writed point by point

I must do clear all but after edited the sample and saved the new ksc file

the program now not find the samlr "sample not loaded" and i manually must find the sample in the program.

i'm going crezy..I read but I don't understeand....I feel i'm loosing time...time that I can use do to other things...

please

p.s.

i'm tryng to search something in this forum but if i search for example "sample not loaded" the forum reply with all the post with the world SAMPLE....

ok no solutions ? this feature don't work ?

first problem : under the screen a red message say that name.ksc is already loaded as a user sample bank, set ksc allocation to clear all

but this is not as sayd in point 4

Because you have the bank already loaded to memory as it message says.

You can either clear it as the message says, or you can unload it, leaving the other EXs or User Banks loaded.

I must do clear all but after edited the sample and saved the new ksc file

the program now not find the samlr "sample not loaded" and i manually must find the sample in the program.

After you load the data, and you have the problem your describing, go to the OSC/Pitch page and touch the tab in the top right of the screen. Select the option “Remap MS Samples”. A list of User Banks should pop up. You should be able to select your library from this list.

Do this, and every sound in your library will be fixed.

Regards
Sharp.

Point No. 4 is for the case when you have not loaded any samples yet. In this case your KSC is already loaded. So you can skip that step. Or as the message you are getting says, I you want to load it again go ahead but set it to clear everything first.

So your next step is to go ahead and load the sample from the User Sample bank and to load it you have to use the Append option. Then you can see it loaded at the end of all the existing Multi-samples.


Amoo Farrokh

Stratario wrote:Point No. 4 is for the case when you have not loaded any samples yet. In this case your KSC is already loaded. So you can skip that step. Or as the message you are getting says, I you want to load it again go ahead but set it to clear everything first.

So your next step is to go ahead and load the sample from the User Sample bank and to load it you have to use the Append option. Then you can see it loaded at the end of all the existing Multi-samples.


Amoo Farrokh

I do this but the program still loose the samples !

Hi to all

thanks for the reply, so there is not a way to not use the funcion :

Remap MS Samples ?

I't s normal that when I edit samples after all the programs loose their
samples ??

thank you again

Redrain wrote:so there is not a way to not use the funcion :

Remap MS Samples ?

I't s normal that when I edit samples after all the programs loose their
samples ??

thank you again

Yes, it's normal but read what I said above on how to remap them back. It's only a matter of clicking an option in the menu and every sound will be patched.

Regards
Sharp.

Ok i'll do "Remap MS Samples"

i whas thinking I'm doing somethings wrong....but if this is normal to everyone it's ok also fo me !!


p.s.

kurzweil k2000r 20 years ago did not loose samples on the road.....

It usually doesn't happen unless you want to play the programs while you're editing the multisamples.
Saving a userbank with the same name should be fine unless you force a new ID. I think.

SanderXpander wrote:It usually doesn't happen unless you want to play the programs while you're editing the multisamples.
Saving a userbank with the same name should be fine unless you force a new ID. I think.

Yes.