Page 1 of 1
Korg m50-88 with protools
Posted: Mon Dec 09, 2013 9:20 pm
by mcbaldwin
I'm trying to use my m50-88 to generate drum tracks in protools. I've set up the M50 editor as a plugin, I'm using the USB connection, seems everything is operating correctly, but-----
The drum track generated by the m50 goes out of sync with the protools session. Both are set to 120 bpm, but they slide out gradually. Am I missing some master/slave setting that keeps them in sync, or allows the DAW to control the keyboard?
Posted: Tue Dec 10, 2013 3:14 pm
by Ajbbklyn
In Global Mode go to Global P1: MIDI
Under the "MIDI Clock" setting, make sure that "External USB" is checked. Instructions can be found on pgs. 220 & 221 of the Parameter Guide. The .pdf file for both the Owner's Manual and the Parameter Guide can be downloaded from the KORG web site.
Also, check your PT settings to make sure that Pro Tools' MIDI clock is set as master.
Korg/Protools
Posted: Tue Dec 31, 2013 5:10 pm
by mcbaldwin
Ajbbklyn wrote:In Global Mode go to Global P1: MIDI
Under the "MIDI Clock" setting, make sure that "External USB" is checked. Instructions can be found on pgs. 220 & 221 of the Parameter Guide. The .pdf file for both the Owner's Manual and the Parameter Guide can be downloaded from the KORG web site.
Also, check your PT settings to make sure that Pro Tools' MIDI clock is set as master.
Thanks for the help. The thing in Protools seems to be under "beat clock" there's a setting for enabling midi control for the connected input device.