Motorization screen

Inzo · Post by **Inzo** » Wed Dec 17, 2014 5:20 am

Hello,

The engine of the screen does not react any more to the order of the button “LIFT”.
I had read that a procedure existed to free the screen, but I do not find any more this one.
Do you have an idea?
Thank you

admar · Post by **admar** » Wed Dec 17, 2014 6:43 am

To the left of the "lift-button" is a button that says it all: Unlock

Inzo · Post by **Inzo** » Wed Dec 17, 2014 8:39 am

Yes, thank you Admar,
but Unlock operates the screen manually and not
automatically like Lift.

admar · Post by **admar** » Wed Dec 17, 2014 8:22 pm

I've apparently misunderstood what you're after.
What do you mean with "free the screen"?

Inzo · Post by **Inzo** » Thu Dec 18, 2014 8:27 am

Excuse me for bad English.
I wanted simply to say that the button LIFT does not order any more the screen. Only the button UNLOCK makes it possible to move the screen manually.

AntonySharmman · Post by **AntonySharmman** » Thu Dec 18, 2014 6:07 pm

Inzo You face hardware issue and you must visit service center !
Motor drive module either is blocked ( you can hear mechanical noise ) nor is out of order .

Inzo · Post by **Inzo** » Thu Dec 18, 2014 7:42 pm

It is OK,
I found handling to be carried out to repair the screen:

1: To extinguish the PA3X
2: By pushing the button LIFT, light the PA3X
3: Press on the button LIFT 5 seconds
4: Posting must go up and go down
5: Now you are in the procedure of adjustment
6: Unbolt the screen by the button UNLOCK and push it
7: Push the button of unlocking UNLOCK to confirm
8: Unbolt the screen by the button UNLOCK and to open it
9: Push the button of unlocking to confirm
10: The screen moves towards the position (in the medium)