Korg Forums

The sequencer nor the patch panel do not transmit anything, the transport does, and the keyboard transmits notes and the knobs send the cc commands as above. A shame that it doesn’t send cc from patc ...

Pretty much any of the usual should work, I used a 6n136.

Ok, this was pre-update, I have not tested it with the update yet.

I hooked up to the TX point and read the midi stream, so here is the midi implementation chart ghetto style.

Mine was transmitting on midi ch1, midi channel can be changed globally, so I think it i ...

I hooked up to the TX point and read the midi stream, so here is the midi implementation chart ghetto style.

Mine was transmitting on midi ch1, midi channel can be changed globally, so I think it i ...

It is a well known issue, the common ground between the sync and audio sockets is why, with a mono plug you are effectively shorting the ring and tip together, meaning that the audio signal on the rin ...

It has the pads for midi connections on the PCB. You will need to use an optocoupler for midi in.

https://www.instagram.com/p/Bu8ftuqFJYy/?utm_source=ig_share_sheet&igshid=aar6yliy8tm9

Jus ...

Did you ever try a mod for this? A lot of newer Korg gear has this annoying power switch issue and it seems really dumb to me, fine if using batteries but when being powered by a psu I do not see the ...

Title says it all, trade my Novation Circuit boxed as new for your electribe sampler (black version) must be in great condition.

I am based in East Anglia.

+1 Belkin Rockstar is NOT a mixer, get a proper passive mixer, not much more expensive than the Belkin but will sound a lot better, actually mix the signals as opposed to feeding them into eachother, ...

Yes I think it sounds great, it has a nice sound probably due to the analog isolator smoothing everything even when not used drastically. I seem to remember the sample rate being about 32khz so probab ...

The power button is a non latching switch, so the problem is electronic, return it as faulty.

Looks fantastic, hope to d/l and try this soon. The UI and look of it are first class going by the screenshots, well done!

If syncing up a lot of Volcas only, then skip midi and use the sync ports, cheaper cables and much less likely to cause problems.

I only have 2 VS, 1 each VKeys,VBass,VBeats and 12 Monotribes, alth ...

I use a variety of different ones, but for quick jams I made [url=http://www.ebay.co.uk/itm/6-Channel-Stereo-Passive-Mixer-ideal-for-Korg-Volca-or-tabletop-synths-ipad-etc-/301532016503]this no batter ...