|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
aethervision
Joined: 14 Sep 2007 Posts: 5 Location: ITALY
|
Posted: Fri Sep 14, 2007 5:19 pm Post subject: aiuto per korg trinity |
|
|
SAlve volevo chiedere se qualcuno sapeva come cambiare i prog rapidamente da tastiera in modo da suonarla in situazioni live velocemente, magari memorizzando un timbro per ogni tastino numerico sulla tastiera |
|
Back to top |
|
|
kimu Platinum Member
Joined: 29 Aug 2007 Posts: 1133 Location: Italy,Milan
|
Posted: Fri Sep 14, 2007 5:35 pm Post subject: |
|
|
Hi aethervision,
as you will see, this is an international forum where common language is english, so it's better to write your next post in english also to receive damn more answer
btw, i translate your question:
aethervision asks if it possibile to have a quicker metod to change prog and/or combi especially for live situation.
i also add a little answer in italian
cioa, dunque quello che comunemente fanno tutti e risalvare i suoni che ti servono in location successive in modo da passare da un suono all'altro con il solo value up/down o con un pedale di tipo switch
and translate in english
you can save the prog/combi you will use during your live in subsequent location (e.g. piano at 001, string at 002 and so on) so that you can switch just with value up/down or using a swtich pedal. |
|
Back to top |
|
|
Francois Approved Merchant
Joined: 06 May 2003 Posts: 4854 Location: Northants - UK
|
Posted: Fri Sep 14, 2007 6:36 pm Post subject: |
|
|
The above trick works fine, but is only useful if you stay in Prog or Combi mode. If you need to change from a Prog patch to a Combi patch or vice-versa, then follow what I wrote below. You could also mix both techniques.
For a live situation, you can program sysex files with a sequencer that you can send as MIDI data with a data filer, or as sysex files if you've used a sysex editor instead. This is what I used to do when playing as it is faster than changing presets or mode from the screen.
For example, sending
F0,42,30,3B,4E,00,00,F7 switches the Trinity in Combi mode and
F0,42,30,3B,4E,02,00,F7 switches the Trinity in Prog mode.
Now, add the bank and program change in sysex (check the ref manual for the values), and your Trinity is ready in a matter of milliseconds.
If you find sysex programming difficult, then create small MIDI files containing only one track, that track containing the above sysex message to start with (Prog or Combi), then a combination of the commands Control 0, Control 32 and Program Change. It will be marginally slower than pure sysex, but still faster than pressing buttons yourself. |
|
Back to top |
|
|
aethervision
Joined: 14 Sep 2007 Posts: 5 Location: ITALY
|
Posted: Fri Sep 14, 2007 6:47 pm Post subject: |
|
|
kimu can you translate in italian the message of francois because i dont'know welll it.
thank you very much, if you would send me an email , the adress is:
foundthekey@hotmail.it
Ps: in italian |
|
Back to top |
|
|
kimu Platinum Member
Joined: 29 Aug 2007 Posts: 1133 Location: Italy,Milan
|
Posted: Fri Sep 14, 2007 10:31 pm Post subject: |
|
|
aethervision wrote: | kimu can you translate in italian the message of francois because i dont'know welll it.
thank you very much, if you would send me an email , the adress is:
foundthekey@hotmail.it
Ps: in italian |
you have a PM with the translation. check your PM box |
|
Back to top |
|
|
aethervision
Joined: 14 Sep 2007 Posts: 5 Location: ITALY
|
Posted: Wed Sep 19, 2007 10:57 am Post subject: |
|
|
what's the meaning of " enable 10's hold " ?
what do i do with this?
thank you
sorry for english again |
|
Back to top |
|
|
sgeorge
Joined: 01 Mar 2007 Posts: 29 Location: Copenhagen
|
Posted: Wed Sep 19, 2007 1:15 pm Post subject: |
|
|
"what's the meaning of " enable 10's hold " ? "
This is an option that you can use only if you have the latest version of the OS.You can find it on the korg.com site.
The function is...lets say you choose sound number 25 (no matter Combi or Prog) and when you want to change it to sound 29 you only need to press the "9" button, in stead of 29...
I hope you understand my explanation....
Regards! _________________ SG |
|
Back to top |
|
|
aethervision
Joined: 14 Sep 2007 Posts: 5 Location: ITALY
|
Posted: Thu Sep 20, 2007 11:02 am Post subject: |
|
|
oh, yes thank you very much !! only a thing ..
i can't change combi with this function , right?
ex:
combi a0010, i want a 0019, i can touch only nine? ( activate function )
sorry for english guys |
|
Back to top |
|
|
Diego Platinum Member
Joined: 13 Sep 2003 Posts: 2882 Location: Italy
|
Posted: Thu Sep 20, 2007 11:04 am Post subject: |
|
|
Hey guy, try try try, and once again try...
Don't be afraid from the Trinity!!! _________________ Diego http://www.myspace.com/diegoinmusic
Korg M3 with EXB Radias & EXB-256 onboard
MOTU Traveler - iBook G4 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|