Korg Forums

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

when i release the sustain pedal
the notes just keep on playing...
and the pedal works just fine.
(it happens even when the pedal is not connected to the instrument)

what should i do?
Crying or Very sad

tnx
evish
_________________
HAVE A NICE KORG

tomleitch · Junior Member Joined: 10 Sep 2007 Posts: 65

is it all the keys that do this?

i've had this problem on one key and on inspection the problem was that the contact inside had got slightly bent.

when i straightened it out it sorted the problem.

But if its all your keys that are doing it its probably a software problem or setting somewhere.

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

it happens with all the keyboard ..

you think i should update the OS ?
i have 1.0.2 installed and it seems to be a little old...

tnx
_________________
HAVE A NICE KORG

lcmorley · Posted: Tue Oct 02, 2007 1:25 pm Post subject:

Have you checked the polarity setting within global mode?

Some pedals are not fully compatible, so you may need to change this from + to - or vise versa.
_________________
Music is the stuff Dreams are made of!!!

Please checkout my music at www.soundcloud.com/lcmorley

My Gear History (from 11 years old until now):
Yamaha PSR-31, Technics KN1000, Technics KN5000, Technics KN7000, Korg PA-80, Korg Triton Classic, Microkorg, Korg Triton Studio, Alesis Ion, Korg Legacy Collection, Korg Triton Extreme, Roland Juno D, Access Virus TI 2, Korg M3, Korg Oasys, Roland TR-8, Korg Kronos 2 88 Platinum.

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

that i know, i wish it was the problem
i use the synth every day and most of the time its ok...
_________________
HAVE A NICE KORG

tomleitch · Junior Member Joined: 10 Sep 2007 Posts: 65

Personally i'd upgrade the OS anyway if its not the latest version.... but if you were reluctant to do that you could try resetting the existing OS, it's just holding down zero and enter buttons when you turn on.

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

will i loose my user bank by doing that?
_________________
HAVE A NICE KORG

shrike · Posted: Tue Oct 02, 2007 4:35 pm Post subject:

Save your sounds before reseting and then load them again. Reset will bring you back to factory settings, meaning no user sounds no user nothing.

Install a new OS then load your sounds and it should be ok, this sustaining problem.

lcmorley · Posted: Wed Oct 03, 2007 10:11 am Post subject:

Then again, if the sustaining problem is due to some dodgy programming within the sounds, then the problem will raise it's weary head again when they are reloaded.

Good luck!
_________________
Music is the stuff Dreams are made of!!!

Please checkout my music at www.soundcloud.com/lcmorley

My Gear History (from 11 years old until now):
Yamaha PSR-31, Technics KN1000, Technics KN5000, Technics KN7000, Korg PA-80, Korg Triton Classic, Microkorg, Korg Triton Studio, Alesis Ion, Korg Legacy Collection, Korg Triton Extreme, Roland Juno D, Access Virus TI 2, Korg M3, Korg Oasys, Roland TR-8, Korg Kronos 2 88 Platinum.

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

its more of a global problem i think..
i'll try updating the OS.

i tried it once...and not a big successes.

its a long process right..
wish me luck

tnx2all
_________________
HAVE A NICE KORG

shrike · Posted: Thu Oct 04, 2007 6:50 am Post subject:

evish · Joined: 30 Sep 2007 Posts: 9 Location: ISRAEL

found it !

its something with my pedal jack,
when the notes keep on playing
I just touch the plug connected to the damper
and they stop.
thank god its not some internal computer problem...

guess I'll fix it
tnx to ALL.
evish
Smile

_________________
HAVE A NICE KORG